Centurion D10 Turbo SMART Sliding Gate Motor
Centurion D10 Turbo SMART Sliding Gate Motor
Description
The Centurion D10 Turbo SMART Sliding Gate Motor is a legendary high-volume performer for sliding gates up to 1000kg. The D10 Turbo SMART now offers you speed, security, endurance and reliability, quicker and easier than with any other gate motor in the D10's class, thanks to SMART technology and wireless connectivity. The intelligent choice in residential, commercial and industrial gate automation. Now with award-winning SMART technology and with its powerful 24V motor and die-cast aluminium gearbox, the D10 Turbo SMART sliding gate motor packs a potential punch, providing excellent security on sites ranging from residential properties, townhouse complexes, residential estates, busy office parks and warehouse facilities.
Specifications
Brand: Centurion
Model: D10 Turbo SMART
Compatible remotes: Nova 1 Button, 2 Button and 4 Button
Compatible backup batteries: Securi-Prod 12v 7.2Amp and Securi-Prod 12v 8Amp batteries
Compatible controller PCB: SmartX controller
Compatible antitheft bracket: D10 SMART Bracket
Compatible safety beams: Photon SMART wireless beams
Compatible rack: Steel rack
Input voltage: 90V - 240V AC ± 10% @ 50Hz *1
Current consumption (Mains): 250mA
Battery charger current output: 1.8A @ 27.4V ± 1%
Maximum number of operations per day: 750
Duty cycle - Mains present: 25%
Motor voltage: 24V DC
Motor power supply: Battery-driven (Standard Capacity - 2 x 12V 7.2Ah)
Current consumption (motor at rated load): 10A
Motor push force – starting: 24Kgf
Gate mass – maximum: 1000Kg
Gate length – maximum: 50m
Drive Pinion: 20T Module 4
Collision Sensing: Electronic
Operating temperature range: -15°C to +50°C
Onboard receiver type: Code-hopping multichannel receiver with selective add and delete
Receiver code storage capacity: 1500 Remote buttons
Receiver frequency: 433.92Mhz
Degree of protection: IP54
Instructions for use
• Refer to detailed installer manual.
Maintenance and care
• Ensure that the track is kept clear from stones, dirt or any obstruction. Gate brushes can be installed to assist in clearing the obstructions.
• Ensure that the Gate wheels V profile, Gate wheels U profile or Gateshox run freely.
• Manual override the motor and check that the gate runs freely without any obstruction.
• Check that the rack is properly secured to the gate and that it does not press down on the operator pinion at any point while opening or closing.
• Clean around the motor area to ensure that vegetation does not grow to close to the motor and pinion.
• Check that the key still opens and closes the camlock as well as the discuss lock for the Anti Theft bracket and lubricate if necessary.
• Inspect the inside of the motor by removing the cover and ensure that it is clear of any insects and dust.
Warnings and limitations
• All installations must be done by a suitable qualified technician.
• Under no circumstances may any of the components be modified.
Specifications
Brand: Centurion
Model: D10 Turbo SMART
Compatible remotes: Nova 1 Button, 2 Button and 4 Button
Compatible backup batteries: Securi-Prod 12v 7.2Amp and Securi-Prod 12v 8Amp batteries
Compatible controller PCB: SmartX controller
Compatible antitheft bracket: D10 SMART Bracket
Compatible safety beams: Photon SMART wireless beams
Compatible rack: Steel rack
Input voltage: 90V - 240V AC ± 10% @ 50Hz *1
Current consumption (Mains): 250mA
Battery charger current output: 1.8A @ 27.4V ± 1%
Maximum number of operations per day: 750
Duty cycle - Mains present: 25%
Motor voltage: 24V DC
Motor power supply: Battery-driven (Standard Capacity - 2 x 12V 7.2Ah)
Current consumption (motor at rated load): 10A
Motor push force – starting: 24Kgf
Gate mass – maximum: 1000Kg
Gate length – maximum: 50m
Drive Pinion: 20T Module 4
Collision Sensing: Electronic
Operating temperature range: -15°C to +50°C
Onboard receiver type: Code-hopping multichannel receiver with selective add and delete
Receiver code storage capacity: 1500 Remote buttons
Receiver frequency: 433.92Mhz
Degree of protection: IP54
Instructions for use
• Refer to detailed installer manual.
Maintenance and care
• Ensure that the track is kept clear from stones, dirt or any obstruction. Gate brushes can be installed to assist in clearing the obstructions.
• Ensure that the Gate wheels V profile, Gate wheels U profile or Gateshox run freely.
• Manual override the motor and check that the gate runs freely without any obstruction.
• Check that the rack is properly secured to the gate and that it does not press down on the operator pinion at any point while opening or closing.
• Clean around the motor area to ensure that vegetation does not grow to close to the motor and pinion.
• Check that the key still opens and closes the camlock as well as the discuss lock for the Anti Theft bracket and lubricate if necessary.
• Inspect the inside of the motor by removing the cover and ensure that it is clear of any insects and dust.
Warnings and limitations
• All installations must be done by a suitable qualified technician.
• Under no circumstances may any of the components be modified.
