Wire Tracker, RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker

Wire Tracker
It can help you quickly find the target line in many pairs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line, and other metal wires in low electricity. Note: maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V. TONE and CONT indicators do not indicate the working status but the measuring result.

Network Cables Verifying
Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing, and off-hook state.

Wire Tracking
It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise, the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". The emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need for multi-testers.

Additional Earphone & Equipped Lamp
In a noisy environment, you can put on the earphones to accurately find the target cable by comparing the strength of the "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered with. At night or in a dark environment, you can turn on the illuminating lamp.

What's in the box
1 x FWT11 Emitter
1 x FWT11 Receiver
1 x RJ11 with Clip Adapter Cable
1 x RJ45 Adapter Cable
1x Earphones
1 x User Manual