1000LM 244 LED Solar Shed Pendant Light with PIR Sensor and Remote Control

1. 244 LED Surrounding Illumination

The ring-style layout uses 244 SMD2835 LEDs to provide practical white lighting around sheds, garages, workshops, storerooms and covered outdoor areas.

2. Five Operating Modes

Includes PIR/OFF, PIR/DIM, constant-light, 24-hour and night-only operating modes for different lighting requirements.

3. Built-In PIR Motion Sensor

The integrated PIR sensor supports motion-activated lighting. Depending on the selected mode, the light switches off or returns to a lower output after approximately 13 seconds without detected movement.

4. Remote Control and Timer

Use the included remote to switch modes, turn the light on or off and select 2-hour, 4-hour or 6-hour timer settings. Constant-light mode must be selected using the remote.

5. Separate Solar Panel with 3m Cable

The split design allows the 6V/3.5W solar panel to be installed outdoors in direct sunlight while the pendant light is positioned inside a shed, garage or covered area.

Product Specifications

Product Type: Solar Shed Pendant Light

Light Source: LED

LED Quantity: 244 LEDs

LED Type: SMD2835

Maximum Stated Brightness: 1000 Lumens

Light Colour: White

Stated Colour Temperature: 4000K-6000K

Colour Temperature Adjustment: No

Manual Brightness Adjustment: Not Confirmed

Operating Modes: 5 Modes

Mode 1: PIR/OFF

Mode 2: PIR/DIM

Mode 3: Constant Light

Mode 4: 24-Hour Mode

Mode 5: Night Mode

Sensor Type: PIR Motion Sensor

Approx. Sensor Delay: 13 Seconds

Remote Control: Included

Timer Settings: 2H / 4H / 6H

Power Source: Solar

Solar Panel Power: 3.5W

Solar Panel Voltage: 6V

Solar Panel Size: Approx. 17.5 x 12cm

Cable Length: Approx. 3m

Battery Type: Rechargeable Lithium Battery

Battery Voltage: 3.7V

Battery Capacity: 4400mAh

Built-In Battery: Yes

Approx. Runtime: 4-7 Hours

Water Resistance: IP65

Lamp Diameter: Approx. 19.5cm

Installation Type: Hanging Installation

Suitable For: Sheds, garages, workshops, storerooms, patios, carports, gazebos, farm buildings and covered outdoor areas

Important Notes

1. Charge Before First Use

Install the solar panel in direct sunlight and allow the battery to charge fully before first use. Ensure the main power switch on the light is set to the ON position.

2. Install the Solar Panel Outdoors

The solar panel must be installed outdoors in a location with strong, unobstructed sunlight. Avoid trees, roof overhangs, walls and other shaded areas.

3. Use the Remote for Constant-Light Mode

Constant-light mode must be activated using the included remote control. Keep the remote in a safe and accessible location.

4. Charging Performance Depends on Sunlight

Cloudy weather, rain, winter sunlight, dust and incorrect panel positioning may increase charging time and reduce operating time.

5. Runtime Varies by Mode

Approximate runtime is 4-7 hours depending on the operating mode, motion frequency, sunlight conditions and battery charge level.

6. Daytime Operation May Affect Charging

When the light is operating in 24-hour mode during daylight, solar charging performance may be reduced or temporarily paused.

7. IP65 Does Not Mean Submersible

The light and solar panel are suitable for normal outdoor rain and dust exposure but must not be immersed, pressure-washed or installed in standing water. Keep cable connections protected.

8. Fixed White Light

The product provides white light only and does not support colour-temperature adjustment. Do not advertise adjustable colour temperature unless verified on the actual unit.

What's in the box
1 x 244 LED Solar Pendant Light
1 x 6V/3.5W Solar Panel
1 x Remote Control
1 x Solar Panel Mounting Bracket
1 x Hanging Hook
1 x Mounting Hardware Set