2.4G Wireless XLR Microphone System With Noise Reduction For Studio

This 2.4G wireless XLR transmitter and receiver system converts a wired 48V condenser microphone into a cable-free setup for recording studios, live shows, and outdoor concerts. The transmitter and receiver pair automatically at startup over encrypted 2.4G transmission, and the built-in digital display shows frequency band and battery life so you can confirm connection status at a glance. Active noise reduction filters electrical interference, while -88dB receiving sensitivity, a 110dB dynamic range, and 20Hz-20KHz frequency response keep vocals and instruments clear. With a 98ft (30m) operating range, you can move freely on stage or in the studio without cable tangling. Each 3.7V 250mAh unit charges by USB-C and runs about 7-8 hours, enough for full rehearsals, worship services, and long events. At 1 oz, the transmitter and 0.9 oz receiver add minimal weight to your mic setup. This wireless XLR system is only for microphones that require 48V phantom power; it does not work with dynamic or non-48V condenser microphones. It connects to amplifiers, live sound cards, and mixing consoles through the XLR interface. Beginners can set it up without extra tools thanks to automatic pairing. Specifications:
- FM Mode: 2.4G
- Frequency Range: 4800MHz
- Frequency Response: 20Hz-20KHz (3dB)
- Receiving Sensitivity: -88dB
- Dynamic Range: 110dB
- Output Power: 10mW
- Usage Distance: Approx. 30m / 98ft
- Usage Time: Approx. 7-8 hours
- Battery Capacity: 3.7V / 250mAh, USB-C charging
- Interface: XLR (for 48V condenser mics)
- Color: Black
- Transmitter Size: 7.2 x 2.5 cm / 2.8 x 1 inch; Weight: 27 g / 1 oz
- Receiver Size: 8 x 2.5 cm / 3.1 x 1 inch; Weight: 26 g / 0.9 oz Packing List:
- 1 x Wireless Transmitter
- 1 x Wireless Receiver
- 2 x XLR to 6.35 Plug Adapters
- 1 x USB-C Charging Cable
- 1 x Instructions Manual

What's in the box
1 x Wireless Transmitter
1 x Wireless Receiver
2 x XLR to 6.35 Plug
1 x USB-C Charging Cable
1 x Instructions Manual