4K 60hz HDMI to HDMI + Audio + ARC Audio Splitter

• HDMI resolution: 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Support video color format: 24bit/deep color 30bit, 36bit
• Audio output: left and right channel and fiber output
• Maximum transmission bandwidth: 300MHz
• Maximum baud rate: 9.0Gbps
• Input/output TMDS signal: 0.5~1.5Volts p-p
• Input/output DDC signal: 5Volts p-p (TTL)
• Input cable length:
• Output cable length:

• Maximum operating current: 500mA

  Features:

• This full HD supports 3D, 4K x 2K, ARC HDCN0020M1 audio splitter, can connect HDMI signal source to a single HDMI display device
  (such as TV, projector) and independent output stereo + SPDIF signal, to achieve HDMI signal audio synchronization separation, and support ARC audio backhaul function.
• One way HDMI dual-mode input, converted into one HDMI+ Audio (SPDIF+R/L) output
• Support audio output: SPDIF+ analog R/L, support full HD, full 3D, 4K x 2K
• Support ARC function: In the case of HDTV directly receiving audio and video content, the HDTV transmits the audio directly to the A/V amplifier receiver via the HDMI cable without an additional cable.
• HDMI dual-mode working mode, the terminal two in one, effectively reducing the number of interfaces
  Can realize audio synchronous separate output, with ADV, 2.0CH, 5.1CH three audio modes to choose from
• LED indicator, when the signal source or signal terminal is working, the corresponding indicator will light up.
• [HDMI Audio Splitter] The role of the toggle switch:
• Audio output mode selection switch, which can realize 2CH, 5.1CH, ADV [advance Audio] three modes of cyclic switching (when switching to 5.1CH,
• The digital signal receiving terminal must support DTS/DOLBY-AC3 decoding, otherwise there is no sound output when the DTS/DOLBY-AC3 signal is input.
• To output sound, switch to 2CH. When the audio mode is in ADV [advance Audio], the output of the sound will depend on the audio format supported by the backend.
• For example, the back end has an HDMI interface power amplifier device that supports 7.1 decodings, and the distributor will output a sound signal of 7.1 channels. [When the signal output signal is 7.1 channels]
  [HDMI Audio Splitter] Usage and function description:
• Connect the mobile device to the input of the audio splitter via the HDMI cable to the HD source (HDMI port) or via the MHL-HDMI cable in the accessory.
• Connect the supported HDMI display device to the audio splitter HDMI output.
• Connect the audio splitter R/L connector to the audio device with an audio cable.
• Connect the audio splitter SPDIF interface to the audio device with a fiber optic cable.

What's in the box
1 x HDMI Audio Splitter