5PCS 433MHz Garage Door Remote Control - Auto Sliding/Gate Opener & Closer

Wide 433.92MHz Compatibility
Designed for 433.92MHz fixed-code gate systems, this universal remote allows convenient wireless operation of compatible sliding gates from a distance. Please note: It is compatible with most fixed-code 433MHz gate systems only and is NOT compatible with rolling code or encrypted systems, including Som-mer, LiftM-aster Secu-ralift, Ni-ce, and similar technologies. Please verify your gate system before purchasing.

Supports Multiple Fixed-Code ICs
This remote supports a wide range of fixed-code IC models, including PT2260, PT2262, PT2264, PT1527, PT527, PT1587, PT1827, HS2260, HS2262, HS2264, HS2240, HS1527, HS527, HS1587, HS1827, RT2260, RT2262, RT2264, RT2240, RT1527, SC527, SC1587, SC1827, SC2260, SC2262, SC2264, SC2240, SC1527, SC527, SC1587, SC1827, EV2262, EV2264, EV2240, and EV1527. Please note: This is a fixed-code remote and does not support remote-to-remote learning or auto-cloning. Always confirm the applicable chip type before ordering.

Simple Code Clearing & Copying
Clearing and duplicating codes is straightforward. To erase stored data, press and hold the A and B buttons simultaneously until the LED flashes continuously, then release both buttons. If pressing any key causes the LED to blink instead of staying on, the memory has been successfully cleared. To copy a signal, place the original remote beside the new remote, hold the A button, then press the corresponding button on the original remote until the LED flashes about 3 times. Repeat the same process for the B, C, and D buttons as required.

4-Button Convenient Control
Equipped with 4 independent buttons, this remote can be programmed for functions such as opening, closing, bell, and alarm control, depending on your compatible system. It is suitable for fixed-code rolling shutter doors, rolling gates, telescopic doors, garage doors, road gates, and other compatible access systems. Important: This product is designed for standard fixed-code systems only and will not operate correctly with rolling code (dynamic code) or encrypted systems, as these generate a unique code with every transmission. Please confirm your system type before purchase to ensure compatibility.

What's in the box
5 x Remote
1 x Manual