Adjustable Infrared Motion Sensor Switch AC110-240V

1 It works by receiving human motion infrared rays. Its installation is very convenient and its using is very wide. It has functions of power indication and the detection indication. 2 It can identify day and night, you can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the ''sun'' position (maximum). 3 It can work in the ambient light less than 3LX when it is adjusted on the ''moon'' position (minimum). As for the adjustment pattern, please refer to the testing pattern. 4 The time delay is adjustable, it can be set according to the your desire. The minimum time is 10sec 3sec and the maximum is 7min 2min. 5 Time delay is added continually, when it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.Condition: 100% Brand New
Item Type: Infrared Motion Sensor
Material: ABS
Power Source: 110-240V/AC
Detection Range: 360 Degree
Power Frequency: 50Hz
Working Temperature: -20 ~+40
Ambient Light: 3-2000LX (Adjustable)
Working Humidity: <93%RH
Time-Delay: Minimum: 10sec 3sec, Maximum: 7min 2min
Installation Height: 2.2-4m / 7.2ft-13.1ft
Power Consumption: 0.45W (Work), 0.1W (Static)
Rated Load: 1200W
Detection Motion Speed: 0.6~1.5m/s
Detection Distance: 6m/19.7ft Maximum (24 )
Product Size: Approx. 11.5 x 11.5 x 6 cm / 4.5 x 4.5 x 2.4 in
Weight: Approx. 178g / 6.3oz
Instruction:
It adopts good sensitivity detector and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. It works by receiving human motion infrared rays. Its installation is very convenient and its using is very wide. It has functions of power indication and the detection indication.
Installation:
1. Turn off the power.
2. Turn clockwise the bottom-stand and take off it. The power wire crosses the hole in the middle of bottom-stand.
3. The bottom-stand is fixed on the selected position with inflated screw.
4. Connect the power and the load into the connection-wire column of the sensor according to connection-wire diagram.
5. The sensor aimed at the mouth of bottom-stand and turned anti-clockwise.
Test:
1. Turn the TIME knob to minimum (-) position with anti-clockwise. Turn the LX knob to SUN position with anti-clockwise.
2. Switch on the power; the controlled load and indication lamp both are not working. Preheat 30 sec later, the load and indication lamp should be turned on synchronization. In the absence of no inductor signals, the load should be stopped working within 5-30sec, the indicator lamp is turned off.
3. After the 1st sense is finished, and it will sense again after 5~10sec. The load should work. When there is no inductor signals in the indicator lamp, the load should be stopped working within 5-15sec.
4. Turn the LX knob clockwise on the minimum (MOON position). If it is adjusted in the less than 3LX, the inductor load should not work after load stop working. If you cover the detection window with the opaque objects (towel etc.), the load work, under no induction signal condition, the load should stop working within 5-15sec.
Note: When testing in daylight, please turn LX knob to (SUN) position, otherwise the sensor lamp could not work!
Some Problem and Solved Way:
The load don't work:
A. Check the power and the load.
B. Whether the indicator light is turned on after sensing? If yes, please check load.
C. If the indicator light does not turn on after sensing, please check if the working light corresponds to the ambient light.
D. Please check if the working voltage corresponds to the power source.
The sensitivity is poor:
A. Please check if in front of the detection window there are barrier that effects to receive the signals.
B. Please check the ambient temperature.
C. Please check if the signals source is in the detection fields.
D. Please check the installation height.
The sensor can't shut automatically the load:
A. If there are continual signals in the detection fields.
B. If the time delay is set to the longest.
C. If the power correspond to the instruction.
D. If the air temperature change near the sensor, air condition or central heating etc.

What's in the box
1 x Detector Switch
1 x 6x6 Connector
2 x Screw
2 x Nut
1 x User Manual