Aerosol Fire Suppression Device for Electrical Distribution Cabinets(10g)

This product is suitable for small distribution cabinets installed on DIN Rail 35mm, communication rooms, outdoor battery boxes, RV distribution cabinets, warehouse electrical cabinets and other small equipment with fire hazards

This product can be installed on DIN Rail 35mm, the size is similar to 1 Pole circuit breaker, and the fire extinguishing capacity is 0.1m , or about 0.4mx0.5mx0.5m equivalent area

This product is a hot start type. When the ambient temperature is 170 or combustion occurs, it will automatically trigger within about 1-6 seconds, releasing inert gas including carbon dioxide to completely cover and isolate oxygen, thus terminating the combustion chain reaction

This product has a small size, no pressure in the storage tank, efficient and rapid startup, and can work normally at an ambient temperature of -40 -85 Celsius This product is easy to install. You can freely cut the length of the thermistor wire (heating wire) according to the installation environment. The pipe mouth can be facing up or down according to the actual situation. Pull the buckle open during installation, and push the buckle tight after installation to ensure that the device is fastened. You can choose multiple or multiple models according to the size of the distribution cabinet

This product is only suitable for use in closed/semi-closed environments and requires DIN Rail 35mm to be installed successfully

Features:

- Heat activated fire suppression

- No power required

- Easy installation

- Maintenance-free design

- Compact and discreet

- Designed for electrical distribution boxes

Applications:

- Electrical distribution boards (DB boards)

- Solar power installations

- Agricultural environments

- Workshops and garages

- Residential and commercial properties

- Area coverage of 0.1cbm (50cmx50cmx40cm)

Technical Specifications:

Product Type: Aerosol Fire Suppression Device (non-pressurized container)
Protected Volume: Up to 0.1 m
Standards: EN 15276-1:2019 (components), EN 15276-2:2019 (design, installation, and maintenance)
Activation Time: Maximum 90 seconds from triggering (in accordance with applicable standards)
Activation Methods: Thermal and/or electrical, depending on the model
Application Method: Total flooding protection for enclosed spaces
Thermal Safety: Minimum safety distances from personnel and materials must be maintained (depending on temperature)

What's in the box
1 x Protect Aerosol Fire Suppression Device