Allegro Microsystems (ACS713ELCTR-20A-T) Current Sensor, Voltage Isolation

Current Sensor, Voltage Isolation, 80 kHz, SOIC, 8 Pins, 4.5 V, 5 V

Product Overview
The ACS713ELCTR-20A-T is a fully integrated, hall effect-based linear Current Sensor IC. It provides economical and precise solutions. The device package allows for easy implementation by the customer. The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized Becomes Hall IC, which is programmed for accuracy after packaging. The output of the device has a positive slope (>VIOUT(Q)) when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sensing.

Low-noise Analogue Signal Path
Device Bandwidth is Set Via New Filter Pin
5µs Output Rise Time in Response to Step Input Current
1.5% at TA = 25°C Total Output Error
1.2mR Internal Conductor Resistance
2.1kVrms Minimum Isolation Voltage from Pins 1-4 to Pins 5-8
185mV/A Output Sensitivity
Output Voltage Proportional to DC Currents
Factory-trimmed for Accuracy
Extremely Stable Output Offset Voltage
Nearly Zero Magnetic Hysteresis
Ratiometric Output from Supply Voltage

Applications
Sensing & Instrumentation, Industrial, Commercial, Communications & Networking, Motor Drive & Control, Power Management, Safety

Product Information
Bandwidth: 80kHz
Sensor Case Style: SOIC
No. of Pins: 8Pins
Supply Voltage Min: 4.5V
Supply Voltage Max: 5V
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
MSL: MSL 2 - 1 year

What's in the box
1 x Current Sensor