ANCEL 12V 2-Cylinder Car Fuel Injector Tester Flow Cleaner Diagnostic Tool

ANCEL JC200 2-Cylinder Injector Tester Machine for Car & Motorcycles, Pressure Adjustment Built-in Air Pump 12V Auto Motocycle Tester Tools

With high fuel prices and expensive repair labor in South Africa, the ACEL JC200 is a money-saving solution. It eliminates the need to disassemble the fuel injectors, allowing for fuel injector checks at home or in a workshop. This solves common problems such as unstable idling, weak acceleration, high fuel consumption, and difficulty starting in cold weather. It is compatible with most twin-cylinder motorcycles and small cars in South Africa, providing long-term savings on high maintenance costs with a one-time investment.

Fuel injector diagnose equipment is a mechatronic product that combines mechanical and microcomputer signal output technology. This product simulates various operating conditions of the engine, and inspect the fuel injectors of various motorcycles & cars .

JC200 Key Features:

• LCD Digital display
• 12V battery powered
• Fuel injection volume testing
• Fuel injection uniformity and atomization performance testing
• Manual testing
• Automatic testing

Item Parameters

• Operating Voltage: DC12V
• Fuel Tank Capacity: 150ML
• RPM: 100-9900 rpm
• Duration: 30-600 seconds
• Pressure: 1.2-1.5 bar

Operating Instructions

1. Remove the injector nozzle from the vehicle.

2. Place the removed fuel injectors in the cleaning solution for cleaning (the JC200 will have a certain cleaning effect during the testing process)

3. Reinstall it into the inspection window for fuel injection testing, allowing direct observation of fuel spray and atomization.

4. Cleaning results can be directly observed on the equipment.

Main functions

(1) Uniformity test: to check uniformity of the injections.

(2) Atomization observation: with help of the backlight, you can observe the spray atomization situation of the injector in a comprehensive and careful manner.

(3) Tightness test: it can detect the tightness and dropping of the fuel injector under working pressure.

(4) Fuel injection volume detection: it can detect the fuel injection volume of the injector under specific working conditions.

Main features

(1) Low-cost solution of injection test.

(2) Use pressurized air to push test fluid, ensure stable pressure output,

achieve consistence in test conditions.

(3) DC12V power supply, enhance portability of the product.

(4) The oil tank liquid level is displayed visually, and the test agent can be

recycled.

(5) Bright background light, you can clearly see the various situations of the

fuel injector when it is working.

(6) Replaceable composite joints for different injector type.

Technical specifications

• Power supply: DC12V Vehicle Battery, 2Amp
• Relative humidity: <85%
• Environment temperature: -5oC ~ + 50oC
• Tank Capacity: 150ml
• Cylinder Volume: 100ml
• RPM: 100~9900 step 100
• Time: 30~600 Seconds
• Oil Pressure: 1.2~1.5bar (Fixed)
• Pressure relief: Manual

Operating Instructions

1. Button Functions:

a) -: Time adjustment / Speed adjustment.

b) +: Time adjustment / Speed adjustment.

c) MODE: Mode key, cycles through modes (Manual mode M, Automatic mode A).

d) START: Start/Stop key, short press to start when stopped, short press to stop when running.

2. Indicator Functions:

a) M: Manual mode.

b) A: Auto Mode.

3. Operation Instructions:

a) In stopped state, briefly press "MODE" to switch to M mode. Use "+/-" keys to adjust output speed (range: 100-9900 RPM). Briefly press "START" to activate operation at set speed.

b) In stopped state, briefly press "MODE" to switch to A mode. Use "+-" keys to adjust timer duration (30-600 seconds). Briefly press "START" to activate. Speed automatically adjusts within 500-6000 RPM range at +/-100 RPM increments every 0.5 seconds, stopping automatically upon countdown completion.

What's in the box
1 x Main unit
1 x Power cable 0.8m
2 x Signal cable 0.8m
1 x Base plate
2 x Lock Thread
2 x Lock Nut
1 x Block Screw
2 x Glass measuring cylinder
1 x fuel distributor rail
2 x 9-11.3 adapter w/z o-ring
2 x 11-12.8mm w/z o-ring
2 x 13-14.5mm w/z o-ring
2 x 10 washer
2 x 14 washer