ANCEL DS600 Bidirectional OBD2 Scanner Car Diagnostic Tool with OBD Adapter

Built For Professional Workshops & Automotive Mechanics

One Diagnostic Tool For Complete Vehicle Repair

Modern vehicles are equipped with dozens of electronic control systems.

For professional mechanics, simply reading fault codes is no longer enough.

A workshop needs a diagnostic tool that can:

• Diagnose all vehicle electronic systems
• Perform advanced maintenance functions
• Complete programming and adaptation procedures
• Test vehicle components
• Support professional repair work

ANCEL DS600 is designed specifically for automotive workshops, professional mechanics and engineers who need a complete diagnostic solution - from fault detection to repair completion

The ANCEL DS600 can be ECU programmed and is compatible with mid-to-high-end luxury vehicles.

• SCAN CODING:FIT FOR BENZ
• GUDING FUNCTIONS:FIT FOR VW/AUDI/SKODA/SEAT
• ONLINE CODING:FIT FOR VW/AUDI/BENZ/BMW/SEAT/PORCHE
• PERSONALIZATION:FIT FOR BMW/PORSCHE/TOYOTA.SUBARU
• PROGRAMMABLE MODULE INSTALLATION:FIT FOR FORD/MAZDA
• POWER BALANCE:FIT FOR FORD/GM/CHRYSLER
• COMPONET MATCHING:FIT FOR VW/AUDVSKODA/SEAT/BMW/CHRSLER/FORD/OPEV/MAZDA/FLAT/HONDA/NISSAN/HYUNDAL/KIA/SUBARU
• ONLINE PARAMETERIZATION:FIT FOR VW/AUDI/SKODA/SEAT
• ONLINE CALIBRATION:FIT FOR VW/AUDI/SKODA/SEAT
• ONLINE ACCOUNT LOGIN SERVICE:FIT FOR VW/AUDI/SKODA/SEAT

you can also check the specific model through the COVERAGE LIST in the device.

Highlights of the ANCEL DS600 Car Scanner

• All Connector Kits: No need to purchase an additional OBD1 adapter; the DS600 comes with a complete set of OBD1 adapters, allowing you to diagnose OBD1-compliant vehicles without worry.,Different connect kit allow DS600 code scanner support some OBD one-generation protocol.
• ECU Coding: Match, learn, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements.
• Bi-directional Control/Active Test : Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.
• 35+ Hot Maintenance Functions:It includes Oil, SAS, IMMO, ABS Bleeding, SRS, EPB, Injector Coding, Battery Registration, DPF Regeneration, Tyre rest, Gear learning, Throttle Mathcing, etc, and still growing.
• Full System Diaganosis: supports full scan of the car's available control modules: Transmission, Fuel System, Light System,A/C system etc.
• Auto Auth : unlocked with the latest software update can securely serve modern FCA / SGW vehicles for OBDII diagnostics, active test, calibrations, and more.
• Anti-theft IMMO Serivce: Compatible with Volkswagen / Audi / Skoda / Seat etc.
• Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc.
• Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford...etc.
• Remote Diagnosis Support: when you encounter any technical or operational problems, our technical team will give you instant support by TeamViewer remote control, saving your time and effort of communicating back and forth by email and improving the efficiency of problem-solving.
• 24 Languages Supported: English, German, Spanish, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Dutch, Hungarian, Korean, Danish, Greek, Arabic, Persian, Romania, Serbia, Finnish, Swedish, Czech, Chinese(traditional)
• 2 Year Free Update: Compared to high-end car scanners on the market that only offer 1 year of free updates, we not only offer 1 year for free update, but also give an additional year.
• 6+ Exclusive Modules: ANCEL DS600 automotive scanner support optional functions modules to meet advanced technician, including Work light, video scope, moduledock, thermal image, battery tester, scope box(Note: you need to buy tools extra).
• 99% of Vehicles Coverage: ANCEL DS600 diagnostic scanner supports almost all vehicles (UP TO 2023/2024/2025 and newer) cover 12v OBDI & OBDII cars such as SUV, minivan,12v light-duty truck, and hybrids,etc.
• Full OBD2 Function: ANCEL DS600 diagnostic scan tool includes all what a popular OBDII scanner has: Read/Erase Codes, Freeze Frame, Live Data, Vehicle Info, O2 Sensor Test, On-Board Monitor Test, I/M Readiness Status, Component Test, DTC Lookup. To own ANCEL DS600, to save an OBDII code reader for you.
• Faster 2.0 GHz Quad-core CPU processor: Greatly enhances the speed and efficiency of running multiple tasks. Spend less time in diagnose, fix car issues more quickly.
• Open Source Android 10.0: You can install any APP, it is equiped with photo, video and multimedia functions. Protect your privacy, beyond the new experience of Android 10.0 OS.
• 8.0MP Rear Camera: Can shoot clearer videos and pictures.
• 8-inch 1280x800 Touchscreen: Upgraded 8" touchable display with a high-resolution screen (1280x800 pixels) and improved color contrast, easy-to-read. With larger screen size, you can see more information at once, reducing the need for scrolling or navigating through multiple screens, more efficient.
• Dual Wi-Fi 2.4GHz/5GHz: With 5GHz Wi-Fi, more stable, 8X-Faster of transmission rate than the old version.
• Wireless Bluetooth connection: Set you free from entangled wires, provides easy connection with vehicles in any location to work comfortably, leaving bad weather outside.
• Remote Diagnosis: Users can remotely control it through mobile phones, tablets, computers, etc. More importantly, our technical engineers can use this function to realize remote technical diagnosis and provide customers with high-quality support.

ECU CODING(Online/Offline):

ANCEL DS600 Factory-Level diagnostic scanner performs Online ECU coding for 98% cars, allows you match ECU replacement and unlock high-level functions to optimize vehicle performance and customize car settings, such as Power Balance, PMI(Programmable Module Installation), Adaptive Data Reset, Online Calibration, Online Parameterization, Flash Hidden Functions, etc. This car diagnostic scanner also supports offline coding to meet vehicle variants

The coding function is used to re-flash the vehicle control modules, it helps you flash the hidden features, or disable the annoying functions, and reprograms the adaptive data for certain components after repairs or replacements.

Such as set alarms and door locking, improve the driving performance and fuel efficiency of your car, disabling the automatic engine start/stop function, access the ECU for more hidden functions, etc.

BI-DIRECTIONAL CONTROL (ACTUATUIN TEST):

ANCEL DS600 scan tool with full-featured bi-directional control ability can actuate solenoids and actuators for active testing, send commands to many systems/components to test their working status, without using the vehicle controls.

Such as:

1.Coolant pump

2.Open/close the window

3.Light control

4.Rearview mirror control

5.Windshield adjustment

6.Adjust the wiper

7.Open the skylight

8.Open the electric tailgate

9.Fuelinjector test

10.Starting fuel pumpe

11.Open and close the clutch

12.Turn the speaker on/off

Professional All System Diagnostic Scanner:

-Retrieve ECU information of the tested control units including unit type, version numbers, and other specifications, etc.

-Read & erase DTCs to locate problem areas and clear the codes.

-View Live Data of each parameter item.

Including-Engines / Auto Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self Leveling Suspension systems,ETC

Support 35+ Service Reset Funtions:

• Oil Reset: Reset the oil life systems every time the oil and oil filter are changed.
• DPF Regeneration: Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.
• ABS Bleeding: When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity
• SAS Reset: Perform steering angle sensor calibration and clear records.
• Injector coding: When fitting the new injectors or after the replacement is complete, Code new injector numbers to replace the previous one.
• Brake-pad reset: Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
• Gear Learning: Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.
• Throttle Adjustment: Initialize the throttle actuators so that the "learned" values stored on ECU are returned to the default state.
• TPMS Reset: After the tire pressure, MIL has been switched on, And maintenance has been carried out, the function for resetting the tire pressure must be carried out in order to reset the tire pressure and switch off the tire pressure MIL.
• Battery Matching: With this function, you can perform a reset operation on the monitoring unit of the vehicle battery, during which the original fault information for low battery level is deleted and the battery adjustment is carried out.
• Battery Register: Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current,register the battery replacement, and activate the rest state of the vehicle battery system.
• AdBlue Reset: Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
• Gearbox Reset: Helps to complete gearbox self-learning and improve the quality of gear shifts.

More Functions:SGW + AFS(headlamp) Reset + Windows Calibration + Seat Calibration + IMMO Service + Immo Programe + Suspension Matching + Coolant Bleeding + Tyre Reset + EGR Adaption + Gasoline Particulate Filter Regeneration + Language Change + A/F Reset + Sunroof Initialization + Elec. Throttle Adaption+ Transport Mode + Nox Sensor Reset + A/T Learning + ODO Reset + Stop/Start Reset + Exhaust Gas Recycling + Check High Vol Battery Health

Multi-languages Support

Italian, English,German, Japanese, Russian, French, Spanish, Portuguese, polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Romania, Serbia, Finnish, Swedish, Czech,Chinese(traditional)

How To Register ANCEL DS600 :

Step 1 :Setting language & Time Zone , Connect WIFI

Step 2 :Agree the Register term

Step 3 :Register an account with your Email box

Step 4 :VCI Activate - Enter the serial number and Password to activate

Vehicels Support Brands:

European Coverage:

Abarth, Alfa, Astonmartin, Audi, Bentley, Benz, Bmw, Bugatti, Citroen,Dacia, Ferrari, Fiat, Fordeu, Jaguar, Lamborghini, Lancia, Landrover,Maserati, Maybach, Mini, Opel, Peugeot, Porsche, Renault, Rolls-Royce,Saab, Samsung, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, Vw,Vw_Cv

American Coverage:

Chrysler, Ford, GM, GMBRAZIL , fiatbrazil (Brazilian Market Only)

Asian Coverage:

Acura, Daewoo, Daihatsu, Fuso, Hino, Honda, Hyundai, Hyundaicv,Infiniti, Isuzu, Isuzu Truck, Kia, Lexus, Mahindra, Maruti, Mazda,Mitsubishi, Nissan, Perodua, Proton, Scion, Ssangyong, Subaru,TATA, Suzuki, Toyota, Gtr Fit Fordau, Mahindra, TATA(India Market Only)

Specifications :

Screen: 8 inches

Operating System: Android 10

Camera:Rear camera 8.0MP

Memory:2G

Storage:32G

Network:Wi-Fi, WL AN 802. 11b/g/n

Bluetooth-compatible: 5.0

Battery: 6000mAh/7.6V

Working Temperature: 0 C ~ 50 C

Storage Temperature:-20 C ~ 60 C

What's in the box
1 x Password Paper
1 x Instruction
4 x 5JF5AL250V Fuse
2 x 5A250V Fuse
1 x EU Plug
1 x CN Plug
1 x For BMW-2
1 x Three-Seater Plug
1 x VCI Bluetooth-compatible Adaptor
1 x G/V+12
1 x TA-22
1 x CR-6
1 x HA-3
1 x TA-17
1 x USB-Micro
1 x For Fiat-3
1 x USB-type C
1 x M/H-12+16
1 x for Benz-38
1 x power cable clips
1 x OBD2 16 pin main cable
1 x Xigeartt Lighter Cable
1 x OBD1 Adaptor
1 x NN-14+16
1 x Main Tablet
1 x Plastic box
1 x Carton