Anycubic PC Filament 1kg - White

The Anycubic PC Filament is an engineering-grade polycarbonate filament designed for makers and engineers who need parts that go beyond what standard PLA or ABS can offer. Compatible with FDM printers fitted with a nozzle of 0.2 mm or above, it prints at 270-290 C with a heated bed of 100-120 C, and supports print speeds of 40-250 mm/s.

With a heat deflection temperature of 110 C and strong mechanical properties - including a tensile strength of 65 6 MPa and an Izod impact strength of 30 12 kJ/m - it is well suited to structural parts, functional components, automotive applications, electronic housings, and outdoor use. The filament also delivers smooth model surfaces with a translucent, lustrous quality. Note that active drying is required before printing: 80 C for 8-12 hours. Supplied on a 1kg reusable spool with intelligent identification chip support for compatible Anycubic printers.

Features

• Engineering-grade PC filament for structural, functional, and outdoor applications
• Heat deflection temperature of 110 C - resists warping and deformation under prolonged heat
• Izod impact strength of 30 12 kJ/m (X-Y) for tough, crack-resistant parts
• Tensile strength of 65 6 MPa and bending strength of 105 10 MPa
• Smooth, translucent, and lustrous surface finish
• Intelligent identification chip supported for compatible Anycubic printers
• Reusable spool with threaded connection system to reduce filament entanglement
• Active drying required before use: 80 C for 8-12 hours

Specifications

• Dry Out Before Use: Required
• Drying Condition: 80 , 8-12 h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.2 mm or above
• Printing Temperature: 270-290
• Heated Bed Temperature: 100-120
• Recommended Printing Speed: 40-250 mm/s
• Maximum Volume Speed (Flow Rate): 12 mm /s
• Density: 1.2 g/cm
• Melt Index: 15-20 g/10 min (270 /1.2kg)
• Melting Point Temperature: 230
• Vicat Softening Temperature: 122
• Heat Deflection Temperature (0.45MPa): 110
• Young's Modulus: 2550 100 MPa
• Tensile Strength: 65 6 MPa
• Elongation at Break: 9 4%
• Bending Modulus: 2900 150 MPa
• Bending Strength: 105 10 MPa
• lzod lmpact Strength (X-Y): 30 12 kJ/m
• Tensile Strength (Z): 25 7 MPa
• Filament Type: Engineering filaments
• Recommend to Print: Structural parts, functional parts, automotive parts, outdoor use, electronic housing, artworks
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported

What's in the box
1 x Anycubic PC Filament 1kg