Behringer EP4000 Professional Stereo Power Amplifier
BEEP4000
R 10 450.00−5%
5.0(2)
View at Takealot rated at Takealot · checked Today
4 offers · 1 retailers
Listed under the same model number
No barcode ties these listings together, so no saving is claimed. See the listings
Matched by model number; no shared barcode
- Average
- R 10 955.28
- Lowest seen
- R 7 399.00
- Highest seen
- R 11 099.00
- Last change
- -R 505.00
- First indexed
- 16 May 2017
- Retailer
- Takealot
Description
Specifications
- Power Rating 8 Ohms: 750W
- 4 Ohms: 1400W
- 2 Ohms: 2000W
- 8 Ohms Bridged: 2800W
- 4 Ohms Bridged: 4000W
- Damping Factor > 300 @ 8 Ohms
INPUT Sensitivity 1.23V (+4dBu)
INPUT Impedance 10 kOhms (Unbalanced)
- 20 kOhms (Balanced)
- Gain 34dB (50x)
- Frequency Response 20Hz - 20kHz, +0/-1dB (10dB Below Rated Power)
- Signal-to-Noise Ratio -100dB, Unweighted
- Total Harmonic Distortion (THD) < 0.02%
INPUT Connectors 2 x XLR Inputs
- 2 x 1/4" Inputs
- Output Connectors 2 x Speakon Outputs
- 2 x Touch-Proof Binding Post Outputs
- Controls Front Panel 1 x Power Switch
- 2 x Gain Control Knobs
- Controls Rear Panel 10 x Mode Selector DIP Switches
- 10 x Limiter/Filter DIP Switches
- Indicators 1 x Power LED
- 2 x Clip LEDs
- 2 x Signal LEDs
- Cooling Continuously Variable Speed Fan
- Back-to-Front Airflow
- Power Consumption 2600W
- Power Requirements 100-120 V~, 50/60Hz 15A
- Dimensions (HxWxD) 3.5 x 19 x 15.8" (88 x 483 x 402mm)
- Weight 36.6 lbs (16.6kg)
The Europower EP4000 from Behringer is a professional-quality rack mount stereo power amplifier designed for installed applications. The rugged all-steel chassis houses a high-current toroidal transformer and Toshiba/Fairchild power transistors for rock-solid reliability and an ultra-high transient response.
- The rear panel of the unit has both XLR and 1/4" inputs, and Speakon and Binding Post outputs, allowing you to connect to virtually any sound system. The system has rear-to-front ventilation to keep the components cool. Protection circuitry protects the unit against overheating and DC overload.
- The amplifier also has independent limiters to prevent distortion, front-panel gain controls for each channel, selectable LF filters to reduce hum, and LED lights for monitoring power, signal, and clip status.
- Professional-quality rackmount stereo power amplifier for installed applications
- All-steel chassis for a long lifespan
- High-current toroidal transformer and Toshiba/Fairchild power transistors provide terrific reliability and high transient response
- XLR and 1/4" input connectors
- Speakon and touch-proof Binding Post outputs
- Rear-to-Front ventilation system with air filter for cool, reliable operation
- Built-in protection circuitry guards against overheating and DC overload
- Power, Signal, and Clip LEDs for easy monitoring
- Front-panel gain control knobs
- Independent limiters on each channel to prevent overload and distortion
- Selectable LF filters remove hum and other distracting low-frequency sounds
- Power Rating 8 Ohms: 750W
- 4 Ohms: 1400W
- 2 Ohms: 2000W
- 8 Ohms Bridged: 2800W
- 4 Ohms Bridged: 4000W
- Damping Factor > 300 @ 8 Ohms
INPUT Sensitivity 1.23V (+4dBu)
INPUT Impedance 10 kOhms (Unbalanced)
- 20 kOhms (Balanced)
- Gain 34dB (50x)
- Frequency Response 20Hz - 20kHz, +0/-1dB (10dB Below Rated Power)
- Signal-to-Noise Ratio -100dB, Unweighted
- Total Harmonic Distortion (THD) < 0.02%
INPUT Connectors 2 x XLR Inputs
- 2 x 1/4" Inputs
- Output Connectors 2 x Speakon Outputs
- 2 x Touch-Proof Binding Post Outputs
- Controls Front Panel 1 x Power Switch
- 2 x Gain Control Knobs
- Controls Rear Panel 10 x Mode Selector DIP Switches
- 10 x Limiter/Filter DIP Switches
- Indicators 1 x Power LED
- 2 x Clip LEDs
- 2 x Signal LEDs
- Cooling Continuously Variable Speed Fan
- Back-to-Front Airflow
- Power Consumption 2600W
- Power Requirements 100-120 V~, 50/60Hz 15A
- Dimensions (HxWxD) 3.5 x 19 x 15.8" (88 x 483 x 402mm)
- Weight 36.6 lbs (16.6kg)
The Europower EP4000 from Behringer is a professional-quality rack mount stereo power amplifier designed for installed applications. The rugged all-steel chassis houses a high-current toroidal transformer and Toshiba/Fairchild power transistors for rock-solid reliability and an ultra-high transient response.
- The rear panel of the unit has both XLR and 1/4" inputs, and Speakon and Binding Post outputs, allowing you to connect to virtually any sound system. The system has rear-to-front ventilation to keep the components cool. Protection circuitry protects the unit against overheating and DC overload.
- The amplifier also has independent limiters to prevent distortion, front-panel gain controls for each channel, selectable LF filters to reduce hum, and LED lights for monitoring power, signal, and clip status.
- Professional-quality rackmount stereo power amplifier for installed applications
- All-steel chassis for a long lifespan
- High-current toroidal transformer and Toshiba/Fairchild power transistors provide terrific reliability and high transient response
- XLR and 1/4" input connectors
- Speakon and touch-proof Binding Post outputs
- Rear-to-Front ventilation system with air filter for cool, reliable operation
- Built-in protection circuitry guards against overheating and DC overload
- Power, Signal, and Clip LEDs for easy monitoring
- Front-panel gain control knobs
- Independent limiters on each channel to prevent overload and distortion
- Selectable LF filters remove hum and other distracting low-frequency sounds