BMT DC Micro Motor Type 130 Hobby Motor 3-6VDC 25x21mm for DIY Robotics
Type 130 | 3-6V DC | 25mm x 21mm Body | 2mm x 9mm Shaft | For DIY, Robotics & STEM
Takealot · checked Today
- Average
- R 129.00
- Lowest seen
- R 116.00
- Highest seen
- R 129.00
- Last change
- -R 13.00
- First indexed
- 29 Sep 2026
- Retailer
- Takealot
Description
The BMT DC Micro Motor 3-6VDC 25MM is a compact Type 130 DC hobby motor designed for makers, electronics enthusiasts, robotics projects and DIY applications. Its small cylindrical form factor makes it easy to integrate into compact mechanisms, models and prototypes where a lightweight DC motor is required.
Operating from 3-6V DC, the motor can be used with a variety of low-voltage battery packs, power supplies and electronic control circuits. Its approximately 25mm body length and 21mm diameter make it suitable for projects where available space is limited.
The motor is a practical choice for experimenting with mechanical movement, small fans, wheels, pumps, models and other DIY mechanisms. A 2mm shaft/bearing diameter provides a compact output point for attaching suitable mechanical components.
Features- Compact Type 130 DC hobby motor.
- Designed for low-voltage 3-6V DC operation.
- Approximately 25mm motor length.
- Approximately 21mm motor diameter.
- Compact cylindrical construction.
- Approximately 2mm shaft/bearing diameter.
- Suitable for makers, hackers and DIY electronics enthusiasts.
- Useful for robotics and educational projects.
- Suitable for small mechanical mechanisms.
- Lightweight and easy to integrate into prototypes.
- Suitable for battery-powered projects.
- Ideal for experimentation and custom builds.
- Product Code: BMT DC MICRO MOTOR 3-6VDC 25MM
- Motor Type: DC Micro Motor
- Motor Style: Type 130 Hobby Motor
- Operating Voltage: 3-6V DC
- Motor Length: Approximately 25mm
- Motor Diameter: Approximately 21mm
- Bearing/Shaft Length: Approximately 9mm
- Bearing/Shaft Diameter: Approximately 2mm
- Application: DIY, robotics, models and electronics projects
The Type 130 format is a popular small DC motor configuration used in hobby electronics and DIY projects. Its compact cylindrical construction allows it to be installed in small mechanisms where larger motors would not be practical.
The motor can be incorporated into custom brackets, robot chassis, model vehicles and other mechanical assemblies using suitable mounting arrangements.
Low-Voltage OperationThe motor is designed to operate from 3-6V DC, making it suitable for many small battery-powered and electronic projects.
Suitable power sources may include appropriately configured battery packs or regulated DC supplies. The motor should be operated within the specified voltage range to avoid excessive speed, current draw or heating.
Mechanical OutputThe motor provides a small approximately 2mm diameter shaft/bearing, allowing suitable miniature mechanical components to be attached.
Depending on the project, the motor can be used to drive:
- Small wheels
- Fans
- Pulleys
- Gears
- Propellers
- Small rotating mechanisms
- Model components
The connected component should be properly matched to the shaft diameter and motor capabilities.
ApplicationsThe BMT DC Micro Motor is suitable for a wide range of applications, including:
- DIY electronics
- Robotics
- Mini robot projects
- Educational STEM projects
- Model vehicles
- Small fans
- Mechanical prototypes
- Moving models
- Science projects
- Maker projects
- Craft projects
- Experimental electronics
- Battery-powered mechanisms
- Custom automation projects
The compact size makes this motor useful for small robotic mechanisms. It can be paired with a suitable motor driver and microcontroller to create basic movement systems.
Possible projects include:
- Mini robot cars
- Small mobile robots
- Miniature mechanisms
- Motorised models
- DIY robotic toys
- Small rotating actuators
When used with a microcontroller, an appropriate transistor, H-bridge or motor-driver circuit should be used rather than connecting the motor directly to a GPIO output.
Easy to IntegrateThe small dimensions of approximately 25mm x 21mm make the motor convenient for prototyping. It can be installed into custom-built brackets or chassis designs and combined with gears, wheels or other mechanical components.
Because the product is intended primarily as a hobby motor, the actual speed, torque and current consumption will depend on the applied voltage and mechanical load.
Important Usage Notes- Operate the motor within the specified 3-6V DC range.
- Do not connect the motor directly to a typical microcontroller GPIO pin.
- Use a suitable motor driver or switching circuit for electronic control.
- Actual motor speed and torque vary according to voltage and mechanical load.
- Avoid prolonged stalled operation, as this can cause excessive current draw and heat.
- Ensure attached mechanical components are compatible with the approximately 2mm shaft.
What's in the box
1 x BMT DC Micro Motor Type 130 3-6V 25mm x 21mm 2mm Shaft