BMT Pro Mini 328 5V 16MHz ATmega328 Development Board
Takealot · checked 20 days ago
- Average
- R 249.00
- Lowest seen
- R 248.00
- Highest seen
- R 249.00
- Last change
- -R 1.00
- First indexed
- 07 Oct 2026
- Retailer
- Takealot
Description
Features:
- Arduino-compatible Pro Mini development board.
- Based on the ATmega328 microcontroller.
- 5V operating voltage.
- 16MHz operating frequency.
- 14 digital input/output pins.
- 6 PWM-capable digital outputs.
- 6 analog input pins.
- Compact design for space-constrained projects.
- External USB connectivity through an FTDI adapter or cable.
- Supports automatic reset when used with a compatible DTR-equipped FTDI interface.
- Supplied without permanently fitted connector headers.
- Headers can be installed in the orientation required by the project.
- Onboard 5V voltage regulator.
- Maximum regulator output of approximately 150mA.
- Over-current protection.
- Reverse-polarity protection.
- Onboard power LED.
- Onboard status LED.
- Reset button.
- Suitable for wearable and embedded applications.
- Compatible with Arduino development environments and compatible software.
Specifications:
- Product Code: BMT PRO MINI 328-5V/16MHZ
- Board Type: Pro Mini 328
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Clock Frequency: 16MHz
- Digital I/O: 14
- PWM Outputs: 6
- Analog Inputs: 6
- Analog Pins: A0-A7 available according to board layout, with A6 and A7 functioning as analog inputs only
- Voltage Regulator: 5V
- Maximum Regulator Output: 150mA
- Input Voltage: 5V to 12V DC
- Protection: Over-current and reverse-polarity protection
- USB: External / off-board
- Programming Interface: 6-pin FTDI interface
- Auto-Reset: Supported with compatible FTDI interface
- Reset: Onboard reset button
- Power Indicator: Onboard LED
- Status Indicator: Onboard LED
- Board Dimensions: Approximately 18 x 33mm
- Weight: Less than 2g
- Connector Headers: Not pre-installed
- ATmega328 Microcontroller
- The ATmega328 provides the processing and I/O capabilities required for a wide variety of embedded projects. Running at 16MHz, the controller is suitable for applications involving sensors, displays, switches, motors, LEDs, communication modules and other compatible electronic peripherals.
- The board provides 14 digital I/O pins, with six of these capable of providing PWM output. Six analog inputs are also available for connecting sensors and other analog devices.
External USB and FTDI Connection:
- Unlike larger Arduino development boards that incorporate a USB interface directly onto the PCB, the Pro Mini uses an external USB-to-serial interface.
- A compatible FTDI Basic Breakout, FTDI adapter or suitable FTDI cable can be connected to the board's 6-pin interface for programming and serial communication.
- When using an FTDI interface that provides the appropriate DTR signal, the board supports automatic reset, allowing the development environment to reset the microcontroller automatically when uploading new firmware.
- USB/FTDI adapter is not included unless specifically stated in the product package.
Flexible Connector Installation:
- The Pro Mini is supplied without permanently populated connector headers. This is an intentional part of its compact design and allows the user to install headers or wires according to the requirements of the final project.
Headers can be positioned to suit:
- Breadboard installation
- Custom PCBs
- Embedded enclosures
- Parallel or vertical connections
- Wearable electronics
- Custom wiring harnesses
- This flexibility can be particularly useful when integrating the board into a custom-designed product or compact enclosure.
Analog Inputs:
- The board provides six analog input channels. The supplied board information also identifies A4, A5, A6 and A7 as pins that are not positioned along the main board edge in the same way as the other connections.
- The analog pin labels are provided on the rear of the board, allowing these connections to be identified when wiring the module.
Power and Protection:
- An onboard 5V regulator provides regulated power for the board when an appropriate DC input is supplied. The specified input range is 5V to 12V DC.
The regulator and board include protection features intended to help protect the circuitry against:
- Excessive current
- Reverse power polarity
- Always use a suitable regulated or appropriately rated DC power source and remain within the specified input range.
Applications:
The BMT Pro Mini 328 is suitable for a wide variety of Arduino-compatible and embedded electronics applications, including:
- Arduino projects
- Robotics
- Wearable electronics
- DIY automation
- Sensor systems
- Home automation
- Internet of Things prototypes
- LED control
- Motor control
- Small control systems
- Data acquisition
- Electronic instruments
- Custom PCBs
- Embedded controllers
- Educational electronics
- Portable electronics
- Space-constrained projects
- Compact Design for Embedded Projects
- The Pro Mini's small 18mm x 33mm footprint makes it particularly useful where a standard Arduino development board would take up too much space. Its lightweight construction also makes it suitable for wearable and portable electronics where minimizing the overall size and weight of the electronics is important.
- Because connector headers are not permanently installed, the board can be adapted to the physical layout of the final project.
- Note: FTDI/USB adapter, connector headers and other development accessories are not included unless specifically stated in the product package.
What's in the box
1 x BMT Pro Mini 328 5V 16MHz ATmega328 Development Board