Cambium ePMP Force 200L 802.11n 5GHz SM (EPMP-F200L)

Wireless service providers and enterprises around the globe are challenged to deliver reliable connectivity in overcrowded RF environments. As spectrum increasingly becomes a scarce commodity, finding the right broadband connectivity solution is vital for all low and high density types of deployments.

SPECTRUM
Channel Spacing: Configurable on 5 MHz increments
Frequency Range: Wide Band Operation 4910-5970 MHz
Channel Width MHz: 5 | 10 | 20 | 40

PERFORMANCE
ARQ: Yes
Nominal Receive Sensitivity (w/FEC) @200MHz Channel: MCS0 -88 dBm; MCS7 = -70 dBm
Nominal Receive Sensitivity (w/FEC) @40MHz Channel: MCS0 = -86 dBm; MCS7 = -68 dBm
Modulation Levels (Adaptive): MCS0 (BPSK) to MCS7 (64QAM 5/6)
Quality of Service: Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority
Transmit Power Range: +3 to 28 dBm (combined, to regional EIRP limit) (1 dB interval)

PHYSICAL
Surge Suppression: 1 Joule Integrated
Environmental: IP55
Temperature: -30 C to 55 C (-22 F to 122 F)
Weight: 1.6 kg (3.5 lbs)
Wind Survival: 200 km/h (124 mph)
Pole Diameter Range: 2.5 - 7.5 cm (1.0 to 3.0 in)
Power Consumption: 8 W Maximum, 5 W Typical
Input Voltage: 30 V Passive PoE (14-30 V DC input)

SECURITY
Encryption: 128-bit AES (CCMP mode)

CERTIFICATIONS
CEDoC available on cambiumnetworks.com

Proprietary Physical Layer: 2x2 MIMO/OFDM
Channel Spacing: Configurable in 5 MHz increments
Frequency Range: Wide Band Operation 4910-5970 MHz
MAC Layer (Media Access Control): Cambium Proprietary
Ethernet Interface: 10/100 BaseT
Protocols Used: IPv4, IPv6, UDP, TCP, IP, ICMP, SNMPv2c HTTPs, STP, SSH
VLAN: 802.1Q with 802.1p priority

What's in the box
Dish: 220Mbps, 25dBi dish
Radio: Cambium ePMP Force 200L 802.11n 5GHz SM
Adjustable Pole Clamps
30W POE injector
Clover cable (for PoE injector)
Mounting accessories