Car Diagnostics ELM327 OBD2 - 2 Pack

For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
This device is NOT compatible with Apple devices

Note:
Some Known cars that the scanners are not compatible are:
VW Polos
Fortuner
Hilux
Older Corsa
Bantam

Features:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure

Functions:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short-term fuel trims
Fuel System status
Fuel Pressure

Does not support J1850 VPW and J1850 PWM protocol (The agreement used by some vehicles before 2007)

ISO9141-2(5 baud init,10.4Kbaud)
ISO14230-4 KWP(5 baud init,10.4 Kbaud)
ISO14230-4 KWP(fast init,10.4 Kbaud)
ISO15765-4 CAN(11bit ID,500 Kbaud)
ISO15765-4 CAN(29bit ID,500 Kbaud)
ISO15765-4 CAN(11bit ID,250 Kbaud)
ISO15765-4 CAN(29bit ID,250 Kbaud)
SAE J1939 CAN(29bit ID,250xKbaud)
CAN(11xbit ID,125xKbaud)
CAN(11xbit ID,50xKbaud)

Support PC / Android phones (software not included)
For Android users: Please download any ELM327-compatible app of your choice

FAQ:
How do I pair ELM327 Bluetooth OBD2 Car Diagnostic Interface Tool?

Make sure your car is OBD2 compatible.
Locate your car's OBD II diagnostic port and plug in your scanner. It's usually found under the driver's side dashboard, under the steering wheel.
Turn on your ignition by turning your key to the 2nd turn. The engine will be off, but this provides power to your dash lights, radio and also the OBD II diagnostic port.
From your Android Smartphone or tablet, go to your SETTINGS, then WIRELESS & NETWORKS, then BLUETOOTH SETTINGS. Turn on Bluetooth, scan for nearby devices and pair your phone with the scanner (Password 1234 or 0000).

Bluetooth Pairing Issues:
Restart your phone
Unpair any existing Bluetooth diagnostic tools.
Make sure the diagnostic App is NOT running in the background. Close the app before pairing
If the password 1234 doesn't work, try 12345 or 0000
Turn off Bluetooth, turn it back on and rescan the device

What's in the box
2 x Bluetooth OBD2 Car Diagnostic Interface Tool