Cat5e Networking Ethernet Cable 24AWG 100m - SE-L80

-100m Cat5e CCA White UTP cable designed as a cost-effective network cabling solution
-Each twisted pair is made from copper-coated aluminium with higher DC resistance than solid copper cable
-The Cat5e cable includes a PVC outer sheath, an AWG rating of 24 and is supplied in an easy pull 100m box
-Category 5 cable, commonly known as Cat 5, is a twisted pair (4 pairs) cable type designed for high signal integrity
-This type of cable is often used in structured cabling for computer networks such as Ethernet, and is also used to carry many other signals such as basic voice services, token ring, and asynchronous transfer mode (at up to 155 Mbit/s, over short distances)
-Category 5e cable includes four twisted pairs in a single cable jacket
-In an unshielded twisted pair (UTP) cable, each pair is represented by a specific colour
-Pair 1 is Blue, Pair 2 is Orange, Pair 3 is Green, and Pair 4 is Brown
-In each pair, one wire is a solid colour, and the other is predominantly white with a colour stripe.
-This use of balanced lines helps preserve a high signal-to-noise ratio despite interference from both external sources and other pairs (this latter form of interference is called crosstalk)
-It is most commonly used for 100 Mbit/s networks, such as 100BASE-TX Ethernet, although IEEE 802.3ab defines standards for 1000BASE-T
-Gigabit Ethernet over Category 5 cable. Cat 5e cable typically has three twists per inch of each twisted pair of 24-gauge copper wires within the cables
-Cat 5e cable is an enhanced version of Cat 5 that adds specifications for far-end crosstalk
-Despite the stricter performance specifications, Cat 5e cable does not enable longer cable distances for Ethernet networks: cables are still limited to a maximum of 100 m in length (normal practice is to limit fixed

What's in the box
1 x 100m Cat5e Cable