- Average
- R 340.00
- Lowest seen
- R 329.00
- Highest seen
- R 529.00
- Last change
- R 189.00
- First indexed
- 09 Jan 2020
- Retailer
- Takealot
Description
The 3.3V DFduino Pro Mini 8Mhz(Arduino Pro Mini Compatible) is a microcontroller board based on the ATmega328.It is a 3.3V DFduino running the 8MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software).
It is an advanced version of official Arduino Pro Mini. The DFRduino Pro mini has 8 analog inputs compared with official 6. The rest bits are exactly the same.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or DFRobot breakout board to provide USB power and communication to the board.
The DFRduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.
Low-voltage board:
Needs no interfacing circuitry to popular 3.3V devices and - modules (GPS, accelerometers, sensors, etc)
Specifications:
- DC input 3.3V up to 8V(power supply from RAW pin)
- DC input 3.3v(from VCC pin)
- Bootloader: Arduino Pro/Pro Mini (3.3V, 8Mhz) w/ Atmega328
- 3.3V regulator
- Max 150mA output
- ATmega328 running at 8MHz with external resonator (0.5% tolerance)
- USB connection off board
- Supports auto-reset
- Over current protected
- Reverse polarity protected
- On board Power and Status LEDs
- Size:0.7x1.3" (18x33mm)
- Envionment Friendly: Rohs Compliance
What's in the box
1 x DFRobot DFRduino Pro Mini V1.3(8M3.3V328) Development Board
