Dulux Maxicover Solvent Based Plaster Primer White 20 L
Builders · checked Today
- Average
- R 1 359.00
- Lowest seen
- R 1 359.00
- Highest seen
- R 1 359.00
- Last change
- R 0.00
- First indexed
- 13 Sep 2026
- Retailer
- Builders
Prepare porous surfaces with Dulux Maxicover Solvent-Based Plaster Primer White 20 L. This alkali-resistant primer penetrates cement plaster, gypsum plaster and concrete, reinforcing the adhesion and durability of the finishing coat. It provides a matt finish with approximate coverage of 8 m² per litre per coat, dries in around 4 hours and typically requires one coat. Apply by brush or roller; brushing is preferred for effective penetration.
Key features- Solvent-based, alkali-resistant primer
- Suitable for cement plaster, gypsum plaster and concrete
- Reinforces topcoat adhesion and durability
- Matt white finish
- Approximate coverage: 8 m²/L per coat
- Drying time: approximately 4 hours
- Recommended coats: one
Which surfaces can I prime?
It is suitable for cement plaster, gypsum plaster and concrete.
How should it be applied?
Apply by brush or roller. Dulux recommends brushing for better penetration.
How much area can 20 L cover?
At approximately 8 m²/L per coat, 20 L may cover around 160 m² on a properly prepared surface. Actual coverage varies with porosity and application.
How many coats are required?
One coat is recommended.
How long does it take to dry?
Approximately four hours under suitable conditions.
Does it replace the finishing coat?
No. Apply a compatible decorative topcoat after the primer has dried.
How should tools be cleaned?
Use Dulux Pre-Paint Brush Cleaner/Degreaser or mineral turpentine.
What safety precautions apply?
Keep away from children and ensure good ventilation during application and drying. Refer to the safety data sheet for full guidance.