EcoFlow 220W Portable Lightweight Bifacial Solar Panel With Kickstand

The EcoFlow 220W Lightweight Portable Bifacial Solar Panel with Kickstand is designed for portable solar charging with compatible EcoFlow power stations and supported solar charging setups.

With a bifacial solar design, the panel captures sunlight from the front and ambient light from the rear side to help generate more power than a traditional monofacial panel. It delivers 220W rated power under STC conditions and can reach up to 243W under BNPI test conditions.

The panel uses N Type TOPCon monocrystalline silicon cells and offers up to 25% conversion efficiency, helping recharge compatible power stations efficiently in suitable sunlight conditions.

Designed for easy transport and setup, this lightweight solar panel weighs approximately 5.1kg 0.3kg and folds down for compact storage. It includes a built-in 2.5m XT60 cable for convenient connection to compatible power stations. The integrated support stand adjusts from 30 to 60 , and the built-in solar angle guide helps position the panel for improved sunlight exposure.

With an IP68 waterproof and dustproof rating, the panel is suitable for outdoor use in camping, RV trips, travel, backup charging, and off-grid power environments.

Please note that solar charging performance varies depending on sunlight strength, panel angle, weather conditions, temperature, shading, and the connected device.

Key Features

• 220W lightweight portable solar panel
• Bifacial design captures front sunlight and rear-side ambient light
• Output can reach up to 243W under BNPI test conditions
• Up to 25% conversion efficiency
• Uses N Type TOPCon monocrystalline silicon cell technology
• Built-in XT60 cable for connection to compatible power stations
• Built-in cable length of 2.5m
• 30 to 60 adjustable support stand
• Integrated solar angle guide for improved positioning
• IP68 waterproof and dustproof rating
• Approximate 5.1kg 0.3kg lightweight design
• Foldable design for easier transport and storage
• Suitable for camping, RV trips, outdoor use, travel, backup charging, and off-grid setups
• Designed for compatible EcoFlow portable power stations and supported solar charging devices

Product Specifications

• Product Type: Portable Bifacial Solar Panel
• Rated Power: STC 220W / BNPI 243W
• Cell Type: N Type TOPCon monocrystalline silicon
• Conversion Efficiency: 25%
• Connector Type: XT60
• Built-in Cable Length: 2.5m
• Open Circuit Voltage: 21.4V
• Operating Voltage: Vmp 18.8V
• Short Circuit Current: STC Isc 12.2A / BNPI Isc 13.5A
• Operating Current: STC Imp 11.7A / BNPI Imp 12.9A
• Waterproof and Dustproof Rating: IP68
• Weight: 5.1kg 0.3kg
• Unfolded Dimensions: 2270mm x 598mm x 26mm
• Folded Dimensions: 603mm x 598mm x 36mm

Compatibility Note

Please check that your power station or solar charging device supports the panel's solar input requirements and XT60 connection before ordering.

Solar charging performance will vary depending on sunlight strength, panel angle, weather conditions, temperature, shading, and the connected device.

For best results, position the panel in direct sunlight and confirm that the connected power station supports the panel's voltage and current range.

For long-term hanging outdoors or vehicle-mounted installation, EcoFlow recommends using rigid solar panels. Lightweight portable solar panels are not recommended for long-term hanging or vehicle installation.

What's in the box
1 x EcoFlow 220W Lightweight Portable Solar Panel
1 x Quick Start Guide
1 x Safety Instructions