Electronic Throttle Body 5184349AC Jeep Dodge Chrysler RAM AKAS

The AKAS Electronic Throttle Body is a precision drive-by-wire throttle valve assembly replacement for Mopar vehicles equipped with 3.6L Pentastar V6 / 3.2L Pentastar V6 Petrol engines (2011-2022), replacing Mopar OE 5184349AC (cross-ref 5184349AB, 5184349AD, 5184349AE, 5184349AF).

PETROL ONLY. This electronic throttle body controls the amount of air entering the engine based on accelerator pedal position and ECU commands, featuring an integrated throttle position sensor (TPS) and DC motor for precise, linear throttle response. Direct-fit installation with identical mounting points and electrical connector to the original factory Mopar part - no modification, adapter, or machining required. High-strength aluminium alloy housing with anti-foul coated valve plate and FKM fluoroelastomer seals ensures long service life. Backed by a 6-month limited warranty.

1. Electronic Throttle Body - Precise Drive-by-Wire Control This is an electronic throttle body (drive-by-wire) with integrated throttle position sensor (TPS) and DC motor, precisely controlling air intake based on accelerator pedal position and ECU commands for linear, smooth throttle response with zero lag or hesitation. Resolves common faults including rough idling, fluctuating idle speeds, hard starts, reduced power, and unexpected stalling - clearing P0120/P0121/P0122/P0123/P0220/P0221/P0222/P0223/P2119 throttle position sensor fault codes. Replaces Mopar OE 5184349AC (cross-ref 5184349AB, 5184349AD, 5184349AE, 5184349AF).

2. Exact OE Match - 3.6L/3.2L Pentastar V6 Petrol Only Precision direct-fit electronic throttle body for Jeep Grand Cherokee WK2 (2011-2021) 3.6 V6, Wrangler JK Unlimited (2012-2018) 3.6 V6, Cherokee KL (2014-2022) 3.2 V6; Dodge Durango WD (2011-2021) 3.6 V6, Charger (2011-2020) 3.6 V6, Challenger (2011-2020) 3.6 V6; Chrysler 300C (2011-2019) 3.6 V6; and RAM 1500 DS (2013-2021) 3.6 Pentastar V6 with 3.6L Pentastar V6 / 3.2L Pentastar V6 Petrol engines. 1:1 OE dimensions, OE connector, identical mounting points - no modification, adapter, or machining required. PETROL ONLY - not compatible with 3.0L EcoDiesel V6, 5.7L HEMI V8, 6.4L HEMI V8, 2.0L Turbo I4, or other engine variants. Verify original OE number before purchase.

3. Direct-Fit Installation - Save Time & Labour Identical form, fitment, and dimensions to the original factory Mopar throttle body - no grinding, modification, or machining required. Installs directly onto your intake manifold with ease, using existing mounting bolts and electrical connector. Pre-calibrated at the factory to OE specifications - however, an OBD scan tool may be required to clear fault codes or perform throttle adaptation (OBD relearn / idle air volume learning) after installation on certain vehicle models with factory ECU programming protections.

4. Premium Materials & Precision Engineering - Built to Last High-strength aluminium alloy housing with excellent corrosion and heat resistance prevents warping and air leaks even under sustained high-temperature operation. The valve plate features a durable non-stick anti-foul coating that repels carbon deposits and oil residue, significantly reducing the need for frequent cleaning. Fitted with high-temperature fluoroelastomer (FKM) gaskets that resist oil vapour degradation, preventing ageing, oil seepage, and air leaks over extended use. Meticulously calibrated valve clearances eliminate issues such as incomplete closure, binding during operation, and sluggish return.

5. OE Quality at Aftermarket Value - 6-Month Warranty Manufactured to strict Mopar OE specifications with dependable electronic precision, rapid signal feedback, solid high-heat tolerance, and anti-vibration capability - performing comparably to the genuine Mopar throttle body (5184349AC / 5184349AF) at a fraction of Jeep/Dodge/Chrysler/RAM main dealer cost. Backed by a 6-month limited warranty covering manufacturing defects. For South African Jeep/Dodge/Chrysler/RAM owners - where Grand Cherokee/Wrangler/Durango/300C/RAM 1500 remain popular V6 vehicles and 3.6L Pentastar throttle body failure is a common cause of rough idling, reduced power, and failed emissions/roadworthy tests.

PETROL ONLY - VERIFY COMPATIBILITY: This electronic throttle body fits Jeep Grand Cherokee/Wrangler/Cherokee, Dodge Durango/Charger/Challenger, Chrysler 300C, and RAM 1500 with 3.6L Pentastar V6 / 3.2L Pentastar V6 Petrol engines (2011-2022), replacing Mopar OE 5184349AC. PETROL ONLY - not compatible with 3.0L EcoDiesel V6, 5.7L HEMI V8, 6.4L HEMI V8, 2.0L Turbo I4, or other engine variants. Verify original OE number, engine code, and connector type before purchase.

VERIFY OE NUMBER: Before making the purchase, please make sure that the OE number is correct. If the OE numbers do not match, they cannot be used together. This throttle body replaces Mopar OE 5184349AC (cross-ref 5184349AB, 5184349AD, 5184349AE, 5184349AF). Do NOT substitute with a different OE number throttle body (e.g. 53034251AC for 5.7L/6.4L HEMI V8, 04891970AC for 2.4L Tigershark, 53032801AC for earlier 3.5L V6) - they have different calibrations, connector types, and bore diameters and are NOT interchangeable.

OBD ADAPTATION / IDLE AIR VOLUME LEARNING MAY BE REQUIRED: Due to factory ECU programming protections on certain Jeep/Dodge/Chrysler/RAM vehicle models, an OBD scan tool may be required to clear fault codes or perform throttle adaptation (OBD relearn / idle air volume learning) after installation to ensure proper operation. This is a function of the vehicle's original software, not a product defect. Please confirm whether your vehicle requires OBD adaptation before placing your order. If OBD adaptation is required, an OBD tool must be purchased separately.

PROFESSIONAL INSTALLATION: Recommended for proper torque on mounting bolts, correct intake manifold gasket seating, and clearing of diagnostic trouble codes (DTCs) / throttle adaptation after replacement. Allow engine to cool completely before servicing. Ensure the intake manifold mating surface is clean and free of old gasket material, carbon deposits, and oil residue before installation. Do not over-tighten mounting bolts.

WARRANTY: 6-month limited warranty covering manufacturing defects under normal use. Does not cover improper installation, drops, contamination, water ingress, use on incompatible vehicles/engines (3.0L EcoDiesel/5.7L HEMI/6.4L HEMI/2.0L Turbo/other variants), wrong OE number, modification, or normal wear. This is an aftermarket replacement part - not affiliated with or manufactured by Stellantis, Jeep, Dodge, Chrysler, RAM, or Mopar.

What's in the box
1 x Throttle Body