Eli-Chem Resins - TotalCast Clear Artwork Resin Kit (4kg)
Eli-Chem Resins - TotalCast Clear Artwork Resin Kit (4kg) - Resin & Hardener
R 4 526.00
Loot · checked Today
- Average
- R 4 526.00
- Lowest seen
- R 4 460.00
- Highest seen
- R 5 700.00
- Last change
- R 66.00
- First indexed
- 24 Nov 2023
- Vendor
- Loot
TotalCast Resin is an optically clear, high-gloss, hybrid polymer resin system which is suitable for the protection and decoration of artwork, paintings or sculptures. This is because it provides a tough coating with good abrasion resistance.
It is easy to use because it cures at room temperatures and is self-levelling. The resin is non-flammable, odour-free and has no solvent content. It is also free of volatile organic compounds (VOCs), is non-toxic and has non-yellowing properties. It is for use on all art surfaces including canvas, wood, MDF and photographs, and can be used over acrylic, oil, watercolour and enamel paint.
This kit consists of 2kg of each component (Resin & Hardener). The Mixing Ratio is 1 : 1
Please note, the mixing ratio must be accurately followed. It is not possible to change the ratio. This would adversely affect the mechanical properties of the resin and would lead to it not drying properly. The mixture should be thoroughly stirred (mix for 3-4 mins) to ensure full homogeneity. Polymer systems tend to heat up much faster in a pot than as a thin film. Therefore mix only the necessary amount usable within the given pot life.
It is easy to use because it cures at room temperatures and is self-levelling. The resin is non-flammable, odour-free and has no solvent content. It is also free of volatile organic compounds (VOCs), is non-toxic and has non-yellowing properties. It is for use on all art surfaces including canvas, wood, MDF and photographs, and can be used over acrylic, oil, watercolour and enamel paint.
This kit consists of 2kg of each component (Resin & Hardener). The Mixing Ratio is 1 : 1
Please note, the mixing ratio must be accurately followed. It is not possible to change the ratio. This would adversely affect the mechanical properties of the resin and would lead to it not drying properly. The mixture should be thoroughly stirred (mix for 3-4 mins) to ensure full homogeneity. Polymer systems tend to heat up much faster in a pot than as a thin film. Therefore mix only the necessary amount usable within the given pot life.
