F411Elvtx Aio Flight Control 1S-2S Elrs Receiver

F411ELVTX AIO Flight Control 1S-2S ELRS Receiver 12A 4in1 ESC 48CH 400MW VTX 25.5X25.5mm for FPV Racing Drone

Warm reminder: Due to the high degree of integration of this PCB, the overall solder joints are relatively small. For those who have no soldering ability or do not know how to use a soldering iron, or are just getting started, or friends who know nothing about Betaflight, please proceed with caution. We will not provide step-by-step technical support for open source products
Adopts STM32F411 processor, ICM42688-P gyroscope, integrated OSD, built-in 5V/1.5A BEC, built-in independent ELRS 2.4G receiver, built-in VTX 5.8G 400MW image transmission module, supports 1-2S12A four-way brushless ESC
This board does not have a black box or barometer module. If you encounter difficulty in starting the motor when using 1S power supply, please adjust the starting power value to a value that can be started appropriately
The AIO's image transmission does not have the LowPower Disarm function turned on by default (it can be understood as: unlocking the image transmission is the maximum power, locking the image transmission is the minimum power, which can reduce the temperature of the PCB during adjustment)If the built-in ELRS is not used, an external SBUS receiver can also be supported
(Due to different batches, the printed words on the product will be different, which does not affect use)
Model: F411ELVTX
Main control chip: STM32F411CEU6 (100MHZ, 512K)
Gyroscope: ICM-42688-P
Barometer: None
OSD chip: AT7456E
Black box: none
LED programming: support
BB ring: support
Input voltage: 1-2S
I2C interface: support
BEC: 5V/1. 5A
Camera input: support
Serial control port: two channels (UART1 is used for internal ELRS receiver and external SBUS, UART2 is used for internal 5.8G VTX Smart Audio)
Flight control firmware: Betaflight 4.4.2 JHEF411.HEX
ESC current: 12A 4
Galvanometer: yes
Firmware: BLHELI_S Z-H-30.HEX
Whether to support Bluebird: support 24K48K96K
Flight controller default ESC drive protocol: DSHOT300
Receiver type: ELRS
Receiver frequency: 2.4G
Receiver signaling protocol: CRSF
Receiver firmware: EP24.V3.0.0
Whether to support WIFI update ELRS firmware: Yes
Image transmission frequency: 5.8G
Image transmission channel: 48CH
Image transmission power: 25mw, 100mw, 200mw, 300mw, 400MW
Image transmission OSD parameter adjustment protocol: Smart Audio
Conversion between hole position and shock-absorbing ball hole position: M3, 25.5x25.5MM
Colour:Black
Material:PCB
Package Contents:
1 x Flight Controller
4 x Shock Balls
1 x 5.8G Antenna
1 x 2.4G ELRS Antenna
1 x 2.0MM Plug Cable
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

What's in the box
1 x Flight Controller
4 x Shock Balls
1 x 5.8G Antenna
1 x 2.4G Elrs Antenna
1 x 2.0Mm Plug Cable