FNIRSI LCR-P1 Overvoltage Protected Component/Transistor Tester & LCR Meter

The new FNIRSI LCR-P1 Overvoltage Protected Component Tester is a handheld Multitester and LCR Meter. It can detect and analyse NPN and PNP transistors, N-channel and P-channel MOSFETs, field effect transistor (FET), triodes, Zener diodes, capacitors, resistors, inductors and batteries by simply inserting the component into the test slots and pressing the Start button.
It can also be used to detect NEC infrared waveforms, so it can be used for the debugging and maintenance of remote control equipment. It provides users with comprehensive detection and analysis, specifically the address code, user code and infrared waveform of the remote.
An important upgrade is the Anti-burn overvoltage protection mechanism: The capacitance resistance ESR tester automatically identifies undischarged capacitors and automatically discharges them at the moment of insertion and locking, effectively avoiding accidental burning.
The design of the replaceable patch seat enables measurement of both tiny precision components and PCB test boards.
The LCR-P1 supports connecting to a computer to export data, easily transferring the collected measurement data to facilitate further in-depth analysis on the computer.

To use the tester is simple. Insert the pins of the component with each component leg into a different numbered slot of the tester, then dial the little handle to grip the pins, and the detector will test it automatically. Finally, the results will clearly be displayed on the backlight colour TFT screen. For components that are soldered in a PCB, use the supplied test hook cables to connect the component and insert the cables' pins into the LCR-P1 tester. It features a One-button operation, automatically detects and shuts down, and you can press the multi-functional button to shut down the detector too. It also has a self-calibration function.

Component Tester Specifications:

• Diode range: <4.5V
• Zener Diode: Transistor Detect Area: 0.01~4.5V
• Zener Diode Detect Area: 0.01~32V
• Triac Range: IGT < 6mA
• Capacitance: 25pF~100mF
• Resistor: 0.01~50M
• Inductance: 10uH~1000uH
• Transistor range: 10 < B < 600
• Diode: Forward voltage drop < 4.5V
• Bidirectional Thyristor: Turn-on voltage < 5V, Gate trigger current < 6mA
• Battery testing: 0.1~4.5V
• Infrared Remote Decoding: NEC protocol IR code
• Intelligent Anti-burn protection
• Firmware upgrade supported
• Data Export supported

General Specifications:

• Battery: 300mAh Rechargeable Lithium Battery (included)
• Display: 1.44 TFT color display
• Dimensions: 130 x 85 x 45mm (L x W x H)
• Weight: 112g

What's in the box
1 x LCR-P1 Tester
3 x Test Hook Cables
1 x Micro-USB Charger Cable, Exchangeable Test Board, User Manual