Fuel Sending Unit 240-33 ohm 10in IP67

1 Characteristic: All fuel sending units consist of a selection of reed switches and fixed resistors. SAE 5-hole mounting mode, heavy duty 316 stainless steel, solid structure. Signal output: 240 ohm - 33 ohm. 2 Application: The fuel level sensor can support the fuel level gauge and tank level gauge of the ship, RV, truck, equipped with washers and mounting screws to prevent the sensor from contacting the bottom of the tank, 3 Long Lasting: The advantages of this doughnut float type level sender over the thick film swim arm type level sender lie in the durability and reliability of the reed switch. There is no need to adjust the tank. 4 Installation Instructions: if it is a plastic fuel tank, the length of the sensor should be 1in / 2.5cm less than the depth of the fuel tank; if it is a metal oil tank, it should be 0.5-1 inch / 1.25-2.5cm deeper than the fuel tank. 5 35mm Float: The float has a diameter of 1.38in (35 mm). If a hole must be drilled, a 1-1/2in (38mm) diameter hole will be perfect. The sender has a non linear output, which can only be matched with the standard instrument with non linear signal.

What's in the box
1 x Fuel Sending Unit