HydroSeal - Hydro Stop Waterproofing - Stop flowing water - 1kg

Introducing Hydro Seal's - HYDRO STOP. This rapid setting sealant is a pre-mixed cementitious grey powder, infused with accelerating chemicals, making it a highly suitable product for critical applications where immediate water sealing and durability are essential. Its ability to set quickly, expand upon setting, and resist environmental factors like frost and de-icing salts makes it a reliable choice for repairing and sealing surfaces in challenging environments.

• Easy to use-requires addition of water only or can be applied in powder form.
• Sets quickly within 1-2 minutes.
• Expands upon setting, ensuring a durable and non-staining repair.
• Resistant to frost and de-icing salts.
• Stop soaking water caused by water pressure.
• Stop flowing water through holes and cracks in concrete and masonry surfaces.
• Seals around pipes, conduits, and ducts.
• Suitable for reservoirs, dams, tunnels, cellars, underground garages, koi/fish ponds, and swimming pools.
• Can be used under water without draining your swimming pool, pond, dam or water feature

Typical Applications:

- Stop soaking water caused by water pressure

- Stop flowing water through holes and cracks in concrete and masonry surfaces

- Seals around pipes, conduits and ducts

- Areas of application are: reservoirs, dams, tunnels, cellars, underground garages, etc

Mixing Instructions:

- VERY IMPORTANT: Stir and mix the dry content of HydroStop thoroughly with a dry spoon before use - this wil ensure that the active ingredients are evenly distributed before use.

- HYDROSTOP sets very quickly, so all preparatory work must be completed beforehand.

- Surface must be firm, clean, absorbent, and free of dust or plaster.

- Mix only the amount that can be applied within two minutes.

- Wet the surface to be treated before application.

- Mix a small amount of HYDROSTOP with clean water to the consistency of putty.

- Apply the material into the prepared opening or crack and hold firmly until it hardens.

- Stop flowing water by forcing dry powder into cracks and hold firmly in place until product has hardened.

- Repeat application if necessary.

What's in the box
1 x 1kg Hydro Stop Waterproofing