iGarden M1-50 Cordless Robotic Pool Cleaner 5 Hour Runtime Wall Climbing

The iGarden M1-50 is a fully cordless robotic pool cleaner built for pools up to 9 m in length. There are no hoses, no cables and no booster pump - you drop it in, press start, and it works independently of your filtration system. That also means it keeps cleaning through load-shedding, provided it's charged.

Navigation uses 3D S-path planning: the robot analyses the pool layout and plans an efficient route rather than moving at random, which reduces missed patches and wasted battery. Four cleaning modes cover floor only, wall and waterline only, wall and waterline first followed by the floor, and full coverage, so you can run a quick floor pass mid-week and a full clean before the weekend. Cycle length is selectable at 1 hour, 1.5 hours, 2 hours or maximum, and a Turbo mode is available for heavier debris loads.

The 4.5 L debris basket uses dual-layer filtration, capturing leaves and larger debris in the outer layer while the finer layer holds back dust and silt. Four motors drive the unit at 12 m/min across floors, walls and the waterline. When the cycle is complete, or the battery drops below 15%, the robot parks against the pool wall on the floor and stops. A retrieval hook is included - attach it to a standard extension pole to lift the cleaner out. Below 30% battery the unit switches to floor-only cleaning to conserve power.

Scheduling runs through the iGarden app, with an AI Timer set to repeat every 24, 48 or 72 hours for hands-off routine maintenance between manual runs.

The M1-50 is designed for water depths of 1 m to 2.5 m and water temperatures of 4-35 C, and is suitable for saltwater pools up to 5 000 ppm.

KEY FEATURES

• Fully cordless - no hose, cable or booster pump required
• 5-hour runtime from a 7 500 mAh (192 Wh) battery
• Floor, wall and waterline cleaning with 4 selectable modes
• 3D S-path navigation for efficient coverage
• 4.5 L dual-layer filter basket
• Turbo mode for heavy debris
• App control with 24 / 48 / 72 hour AI Timer
• Auto-parks at the pool wall when the cycle ends; retrieval hook included
• Saltwater compatible (up to 5 000 ppm)
• Suits pools up to 9 m in length

SPECIFICATIONS

Brand: iGarden

Series: M1

Model: M1-50

Type: Cordless robotic pool cleaner

Battery life: 5 hours

Battery capacity: 7 500 mAh (192 Wh)

Charging time: Approx. 5 hours

Maximum pool length: 9 m

Working water depth: 1 - 2.5 m

Water temperature: 4 - 35 C

Salt tolerance: Max 5 000 ppm

Pump flow rate: 12 - 19 m /h

Moving speed: 12 m/min

Number of motors: 4

Running voltage / current: 25.5 V / 1 A

Filter capacity: 4.5 L

Filtration: Dual layer

Cleaning modes: Floor only / Wall & waterline only / Wall & waterline then floor / Full coverage

Turbo mode: Yes

Cycle options: 1 h / 1.5 h / 2 h / Max
AI Timer: 24 h / 48 h / 72 h

App control: Yes

End-of-cycle behaviour: Parks at pool wall and stops

Dimensions (L × W × H): 482 × 392 × 249 mm

Net weight: 10.5 kg

Gross weight: 15.3 kg

What's in the box
1 X iGarden M1-50 Cordless Robotic Pool Cleaner
1 X Charger
1 X Retrieval hook (extension pole not included)
1 X Filter basket
1 X User manual