KP800 UPC Fiber Optic OTDR Tester - 1310/1550nm Fibre Cable Analyzer

KP800 UPC OTDR Fiber Optic Tester - 1310/1550nm Dual-Wavelength Network Analyzer

Short Description

9-in-1 Multi-Function Fiber Tester: Combines OTDR, Event Map, Optical Power Meter (OPM), Visual Fault Locator (VFL), Stable Light Source (LS), Optical Loss Testing, Network Testing, LED Flashlight, and RJ45 Wire Tracking in one professional handheld device.

1310/1550nm Dual-Wavelength OTDR: Provides accurate fiber length measurement, attenuation analysis, event detection, and fault location at 1310 nm and 1550 nm, with testing ranges from 100 m up to 100 km.

4.3-Inch HD Touchscreen: Features a responsive, high-definition colour touchscreen for convenient navigation, trace viewing, event analysis, and measurement results.

One-Click Automatic Testing: Performs automated fiber measurements and event analysis with minimal setup, making it suitable for both experienced technicians and routine field testing.

Precise Fault Detection: Offers a short 1.5 m event blind area and 7 m attenuation blind zone for accurate identification of connectors, splices, bends, breaks, and other fiber events.

Wide-Range Optical Power Meter: Supports 9 calibration wavelengths from 850 nm to 1650 nm and measures optical power from -50 to +26 dBm.

Powerful VFL & Stable Light Source: Includes a 10 mW Visual Fault Locator with a claimed detection distance of over 10 km, plus a stable optical light source supporting CW and multiple modulation frequencies.

RJ45 Network Testing & Cable Tracking: Supports cable sequence testing, cable length measurement, and wire tracking using the included RJ45 remote module and wire tracker receiver.

5200mAh Battery & Type-C Charging: Built-in 5200mAh / 3.7V lithium battery provides convenient portable operation and recharges through the Type-C USB port.

Replaceable Optical Interfaces: Supports universal FC/SC/ST connections and includes replaceable SC and FC adapter heads for flexible fiber testing.

Long Product Description

The COMPTYCO KP800 UPC OTDR Fiber Optic Tester is a professional multi-functional fiber optic and network analyzer designed for FTTH installation, telecommunications, fiber network maintenance, troubleshooting, and field service applications. By combining multiple optical and copper cable testing functions into one compact handheld device, the KP800 helps technicians perform a wide range of testing and diagnostic tasks without carrying several separate instruments.

At the core of the KP800 is a 1310/1550nm dual-wavelength OTDR, designed for testing G.652D single-mode fiber. It supports selectable measurement ranges from 100 m to 100 km, making it suitable for both short-access fiber links and longer telecommunications networks. With a dynamic range of 24/22 dB, the tester can provide useful information about fiber length, attenuation, connection points, splices, bends, and potential breaks.

The KP800 features an event blind area of approximately 1.5 m and an attenuation blind zone of approximately 7 m, allowing technicians to identify fiber events with greater precision. The device supports up to 20,000 sampling points and multiple selectable pulse widths ranging from 5 ns to 10 `ecs, allowing testing parameters to be adjusted according to the fiber link and measurement requirements.

A convenient one-click automatic measurement and analysis function simplifies OTDR operation by automatically performing measurements and analyzing detected events. The resulting event information can be viewed directly on the device and saved for later reference.

The KP800 also incorporates a wide-range Optical Power Meter (OPM) supporting nine calibration wavelengths: 850, 1270, 1300, 1310, 1490, 1550, 1577, 1625, and 1650 nm. With a measurement range of -50 to +26 dBm, it can be used for checking optical signal levels across various fiber optic network applications.

For visual fault identification, the integrated Visual Fault Locator (VFL) provides an output power of 10 mW and is specified for detecting suitable fiber faults over distances exceeding 10 km. The visible red laser can assist technicians in locating fiber breaks, macrobends, poor connections, and other faults where visible laser identification is possible.

The built-in Stable Light Source (LS) uses an FP-LD laser with an output of -5 dBm `b12 dB and supports CW, 270 Hz, 330 Hz, 1 kHz, and 2 kHz modulation modes. Combined with an optical power meter, this function can be used for optical loss testing and fiber link performance verification.

For copper network installations, the KP800 includes RJ45 network testing and wire tracking functions. The system supports cable sequence testing, cable length measurement, and cable tracing using the supplied RJ45 remote testing module and handheld wire tracker receiver.

The tester is operated through a 4.3-inch HD colour touchscreen, providing clear visibility of fiber traces, event maps, test results, and system settings. Its compact housing includes protective rubber corners to provide additional protection during field use.

Test results can be stored internally, with capacity for at least 1,000 files, and exported using the supported TF/SD memory card interface. OTDR measurements can be saved in the standard .SOR file format, making it convenient to transfer and analyze test records.

The KP800 is powered by a built-in 5200mAh / 3.7V lithium battery and supports convenient Type-C USB charging. With its portable design, comprehensive testing functions, interchangeable optical adapters, and included cable-tracking accessories, the COMPTYCO KP800 UPC OTDR Fiber Optic Tester provides an all-in-one solution for professional fiber optic and network installation and maintenance.

What's in the box
1 x Tester kit