KRUGARO 24V 80W Automatic Water Pressure Booster Pump

Description

The KRUGARO 24V 80W Automatic Water Pressure Booster Pump is designed to provide additional water pressure and flow where it is needed. Its compact design makes it ideal for applications such as showers, geyser installations, water purification systems, filtration stations and other dedicated water outlets.

Powered by a 24V brushless permanent-magnet DC motor with a centrifugal impeller, the pump is designed for efficient water movement with relatively quiet operation. Its compact construction allows it to be installed conveniently in areas where space is limited.

The integrated intelligent start-stop function automatically activates the pump when water flow is detected and switches it off when water demand stops. This provides convenient automatic operation without requiring the pump to run continuously.

A manual operating mode is also available, allowing the pump to be started manually when required.

With a maximum flow rate of 25 L/min and maximum pressure of 1.28 bar, the KRUGARO booster pump provides practical pressure assistance for suitable low-pressure water applications.

Key Features

• 24V DC operation - Designed for efficient low-voltage water boosting.
• 80W power - Provides effective pressure and flow assistance.
• Automatic start-stop - Automatically starts when water flow is detected and stops when water demand ends.
• Manual operating mode - Allows the pump to be manually activated when required.
• Maximum flow of 25 L/min - Provides strong water flow assistance for suitable applications.
• Maximum pressure of 1.28 bar - Helps improve pressure at compatible water outlets.
• Brushless permanent-magnet motor - Designed for efficient and reliable operation.
• Centrifugal impeller - Provides consistent water movement through the system.
• Compact construction - Convenient for installations where space is limited.
• Low-noise operation - Maximum rated noise level of approximately 45 dB.
• Easy installation - Supplied with mounting hardware and accessories.
• 24V transformer included - Ready for connection to a suitable mains supply.

Ideal Applications

The KRUGARO booster pump is suitable for a variety of applications where additional water pressure or flow is required:

• Shower pressure boosting
• Geyser installations
• Water purification systems
• Water filtration stations
• Caravan and camping water systems
• Dedicated water outlets
• Low-pressure water applications
• Other compatible water supply systems

Intelligent Start-Stop

When the pump is operating in automatic mode, it detects water flow through the system and responds automatically.

Water flow detected Pump starts

Water flow stops Pump stops

This allows the pump to provide pressure assistance when water is being used without needing to operate continuously.

Specifications

• Brand: KRUGARO
• Product Type: Automatic Water Pressure Booster Pump
• Voltage: 24V DC
• Power: 80W
• Current: 2.8A
• Maximum Flow: 25 L/min
• Minimum Flow: 1.0 L/min
• Maximum Pressure: 1.28 bar
• Motor Type: Brushless Permanent-Magnet DC Motor
• Impeller Type: Centrifugal
• Maximum Noise: 45 dB
• Outlet Diameter: 15 mm
• Pump Body Pipe Size: 1/2 inch
• Brass Union Size: 1/4 inch
• Automatic Start-Stop: Yes
• Manual Mode: Yes
• Transformer: 24V included

Installation

The compact design allows the pump to be conveniently installed into a suitable water line serving the intended outlet or application.

Install the pump according to the water-flow direction indicated on the pump and ensure that all connections are properly sealed before operation.

The supplied transformer provides the required 24V DC power supply. The pump must not be connected directly to a 230V AC mains supply.

For best performance, ensure that the water supply, pipework and fittings are suitable for the pump's specifications.

Important Information

This is not a self-priming pump. A continuous and adequate water supply must be available at the pump inlet for proper operation.

1. The pump requires a constant water flow/supply and is not designed to draw water from an empty or unpressurised source.

• Maximum flow and pressure depend on the installation, water supply and system resistance.
• The pump is intended to provide pressure assistance rather than replace a high-capacity whole-house water-pressure system.
• Do not exceed the pump's rated maximum pressure.
• Ensure all water connections are secure before use.
• Use only a suitable 24V power supply.
• Keep electrical connections protected from direct water exposure.

What's in the box
1 x KRUGARO DC 24V 80W Automatic Water Pressure Booster Pump
1 x 24V Transformer
1 x 45 Degree Pipe
1 x Adhesive Sticker
2 x Mounting Screws
1 x Manual