Max Pump 0.75 kW Peripheral Booster Water Pump - High Pressure, Multi-Outlet Home Use, Automatic Operation

Powerful and Reliable Automatic Pressure for the Whole Home

 

The MAX PUMP 0.75kW Peripheral Booster Water Pump is a high-performance solution engineered to deliver reliable and powerful water pressure throughout a standard domestic home. Powered by a robust 0.75kW motor (1 HP), this pump utilizes a peripheral vane design to generate superior pressure (head) and flow, making it ideal for simultaneously supplying two or more bathrooms, boosting kitchen fixtures, and handling garden irrigation.

This pump is self-priming, offering strong suction lift (up to 9m) for drawing water from sources like wells and tanks. It is typically supplied as a complete automatic system with a pre-fitted electronic pressure control switch (Flow Control). This controller ensures the pump starts immediately on demand, maintains consistent pressure, and provides essential dry-running protection, safeguarding the unit against damage if the water supply is exhausted.

  Key Benefits

• Robust Power: 0.75kW motor delivers strong performance suitable for medium to large homes.

• High-Pressure Output: Peripheral vane design maximizes pressure (head) for multi-story homes and long pipe runs.

• Fully Automatic: Integrated electronic controller provides instant start/stop operation and dry-run protection.

• Self-Priming: Reliable suction capability (up to 9m) for drawing water from underground tanks or sources.

• Energy Efficient: Optimally sized for balancing performance and running costs in typical household scenarios.

  Estimated Technical Specifications

• Brand/Model: MAX PUMP Peripheral Booster Pump

• Type: Self-Priming Peripheral Vane Water Pump

• Nominal Power (P2): 0.75 kW (1 HP)

• Voltage: 220 V – 240 V / 50 Hz (Single-Phase)

• Max Flow Rate (Q Max): Approximately 40 l/min to 55 l/min

• Max Head (H Max): Approximately 45 m to 50 m

• Max Suction Lift: Up to 9 m

• Pump Body Material: Cast Iron (common) or Stainless Steel variant

• Impeller Material: Brass (common for peripheral pumps) or PPO

• Inlet/Outlet Connections: 1 inch (G1″)

• Max Working Pressure (Controller): 10 Bar (when included)

• Max Liquid Temp.: 60 degrees C (when controlled)

  Ideal For

• Medium to Large Homes: Providing consistent pressure to multiple taps, showers, and appliances simultaneously.

• Boosting Municipal Supply: Enhancing inadequate pressure from the main water line.

• Rainwater Harvesting Systems: Drawing water from storage tanks and pressurizing the entire house system.

• High-Pressure Irrigation: Running small to medium-sized sprinkler systems.

  What's in the Box

• 1 x MAX PUMP 0.75kW Peripheral Water Pump.

• 1 x Automatic Pressure Control Switch (Flow Control) (often included in the kit).

• 1 x Power Cable with plug.

• 1 x User Manual.

  Top 3 Frequently Asked Questions (FAQs)

1. What is the difference between this and the 0.75kW Jet Pump?

   • The Peripheral design prioritizes pressure (head) using a vane impeller, while a Jet pump uses a jet-and-diffuser assembly for stronger, more consistent self-priming capabilities. Both are used for boosting, but the peripheral pump often achieves a higher max head.

2. Can I run this pump dry?

   • The integrated automatic controller provides dry-running protection and will shut the pump off if the water source runs out. However, this is a safety feature, and the pump should never be intentionally run without a stable water source.

3. Does this pump require a pressure tank?

   • No. Because it is fitted with an electronic Flow Control, it operates on a demand basis and does not require a large pressure tank, offering a more compact installation.