Microchip (MCP14700-E/SN) MOSFET Driver IC, High Side And Low Side

MOSFET Driver IC, High Side And Low Side, 4.5V-5.5V Supply, 3.5A Out, 27ns Delay, SOIC-8

Product Overview
The MCP14700-E/SN is a high-speed synchronous MOSFET Driver designed to optimally drive a high-side and low-side N-channel MOSFET. The MCP14700 has two PWM inputs to allow independent control of the external N-channel MOSFETs. Since there is no internal cross condition protection circuitry the external MOSFET dead time can be tightly controlled allowing for more efficient systems or unique motor control algorithms. The transition thresholds for the PWM inputs are typically 1.6V on a rising PWM input signal and typically 1V on a falling PWM input signal. This make the MCP14700 ideal suited for controllers that utilize 3.0V TTL/CMOS logic. The PWM inputs are internally pulled low.

Ideally suited to drive low figure-of-merit (FOM) MOSFETs
Independent PWM input control for high-side and low-side gate drive
Input logic level threshold 3.0V TTL compatible
Dual output MOSFET drive for synchronous applications
2A (typical) High peak output current
Internal bootstrap blocking device
+36V Boot pin maximum rating
45µA Typical low supply current
High capacitive load drive capability - 3300pF in 10.0ns (typical)
Input voltage under-voltage lockout protection
Over-temperature protection

Applications
Motor Drive & Control, Power Management, Automotive

Product Information

No. of Channels: 2Channels
Driver Configuration: High Side and Low Side
Power Switch Type: MOSFET
Supply Voltage Min: 4.5V
Supply Voltage Max: 5.5V
Driver Case Style: SOIC
Input Type: Non-Inverting
IC Case / Package: SOIC
No. of Pins: 8Pins
Source Current: 2A
Input Delay: 27ns
Output Delay: 27ns
Sink Current: 2A
Operating Temperature Min: -40°C
Operating Temperature Max: 125°C
Qualification: AEC-Q100
MSL: MSL 1 - Unlimite

What's in the box
1 x MOSFET Driver IC