Microchip (MCP2561-E/P) CAN Bus, Transceiver, CAN, LIN, 1

Product Overview
The MCP2561-E/P is a high-speed CAN Transceiver serves as the interface between a CAN protocol controller and the physical bus. The MCP2561 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898-5 standard. It will operate at speeds of up to 1Mb/s. Typically, each node in a CAN system must have a device to convert the digital signals generated by a CAN controller to signals suitable for transmission over the bus cabling (differential output). It also provides a buffer between the CAN controller and the high-voltage spikes that can be generated on the CAN bus by outside sources. It has under-voltage detection on both supply pins: VDD and VIO. Typical under-voltage thresholds are 1.2V for VIO and 4V for VDD. When the device is powered on, CANH and CANL remain in a high-impedance state until both VDD and VIO exceed their under-voltage levels.

Supports 1Mb/s Operation
Implements ISO-11898-5 standard physical layer requirements
SPLIT Output pin to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered
An unpowered node or brown-out event will not load the CAN bus
Permanent dominant detection on TXD
Permanent dominant detection on bus
Protection against damage due to short-circuit conditions
Protection against high-voltage transients in automotive environments
Automatic thermal shutdown protection

Applications
Automotive, Communications & Networking

Product Information
IC Interface Type: CAN, LIN
No. of TX Buffers: 1
No. of RX Buffers: 1
Supply Voltage Min: 4.5V
Supply Voltage Max: 5.5V
Interface Case Style: DIP
No. of Pins: 8Pins
Operating Temperature Min: -40°C
Operating Temperature Max: 125°C
Product Range: -
Automotive Qualification Standard: -
MSL: MSL 1 - Unlimited

What's in the box
1 x Microchip (MCP2561-E/P) CAN Bus, Transceiver