Mix Box 3D Printer Filament Dehumidify Cabinet Dry Storage Box,Hold 5 rolls

Mix Box products are carefully selected and tested to withstand South Africa's unique climate and usage demands. From humid coastal areas to dry inland regions, our filament dry box ensures your 3D printing materials stay in optimal condition year-round.

Why choose Mix Box?

Active Dehumidification - Protect Your Filaments from Moisture - Designed to maintain a controlled low-humidity environment for 3D printing filament. Protects PLA, ABS, PETG, TPU, and PC from excess moisture - preventing clogging, stringing, poor adhesion, and failed prints. In South Africa's climate, storing filament in a sealed container with desiccant is essential year-round.

Digital Humidity Control - Set It and Forget It - Built-in digital control panel displays internal humidity and temperature in real-time. Allows you to adjust the desired relative humidity according to different filament materials - precise control for every spool.

5-Roll Storage Capacity - Spacious for Growing Collections - Accommodates up to 5 filament rolls simultaneously. Perfect for home 3D printing setups, workshops, and professional printing environments. Keep all your opened spools safely stored in one place.

Suitable for Multiple Filament Types - Ideal for storing PLA, ABS, PETG, TPU, and PC. The manual provides recommended storage humidity ranges for different materials. For moisture-sensitive materials like TPU and Nylon, keeping humidity below 20% is recommended.

Energy-Efficient - Less Than 8W Continuous Operation - Low-power dehumidification system operates at less than 8W. Suitable for 24/7 filament storage without driving up your electricity bill - a practical investment for serious hobbyists.

Clear Tempered Glass Door - Check Inventory at a Glance - Transparent tempered glass door allows you to easily check filament stock without opening the cabinet and disturbing the controlled environment. No more guessing which spools you have left.

Secure Storage with Built-in Lock - Built-in lock keeps stored filament protected and provides additional security in workshops, studios, and shared working environments.

Wide Voltage Adapter - International Compatibility - Supports AC 100-240V input with DC-powered cabinet operation. The supplied adapter connects directly to the cabinet - convenient everyday use anywhere.

PERFECT FOR:

Home 3D printing enthusiasts and hobbyists;

Makerspaces, schools, and education labs;

Small businesses and professional print farms;

Workshops and studio environments;

Designers and product developers;

Engineers and prototyping professionals;

SETUP & USAGE GUIDE:

• Step 1 - Initial Conditioning: Before placing filament inside, run the empty cabinet for approximately 8-12 hours until the desired humidity range is reached.
• Step 2 - Set Your Humidity: Use the digital control panel to adjust the relative humidity according to your filament type. Refer to the manual for recommended ranges.
• Step 3 - Load Your Filaments: Place up to 5 spools on the included storage rack. Close the door and let the cabinet maintain optimal conditions.
• Step 4 - Monitor & Maintain: Check the digital display regularly. The tempered glass door lets you see inventory without opening the cabinet.

QUICK TIPS:

• This cabinet is designed for dehumidification and dry storage only - it does not actively increase humidity and does not control internal temperature. The temperature shown on the display is the cabinet's measured internal temperature;
• For best results, run the empty cabinet for 8-12 hours before adding filament;
• Store different filament types at their recommended humidity ranges (see table above);
• Keep the cabinet in a stable environment away from direct sunlight;
• Check the door seal periodically to ensure it remains airtight;
• The cabinet operates on low power (<8W) - safe for continuous use;

• Brand:Mix Box
• Model:AN-28SD
• Product Type:3D Printer Filament Dehumidifying Storage Cabinet
• Capacity:Up to 5 Filament Rolls
• Outer Dimensions:400 × 260 × 330 mm
• Inner Dimensions:398 × 228 × 248 mm
• Power Consumption:<8W
• Input Voltage:AC 100-240V
• Cabinet Power: DC 5V 2A
• Package Dimensions: 45cm x 35cm x 30cm (17.72in x 13.78in x 11.81in)
• Weight: 4.5 kg (9.92 lbs)
• Door: Tempered Glass
• Display: Digital Humidity & Temperature Display
• Humidity Control: Adjustable Digital Control
• Recommended Humidity Ranges PLA: 30%-50% / ABS: 20%-40% / PETG: 20%-40% / TPU: 20%-40% / PC: 20%-30%

Note:

• This cabinet is designed primarily for dehumidification and dry storage.
• It does not actively increase humidity and does not control internal temperature; the temperature shown on the display is the cabinet's measured internal temperature.
• For initial use, run the empty cabinet for approximately 8-12 hours until the desired humidity range is reached before adding filament.
• Due to lighting and screen settings, please allow for slight color differences.
• Due to manual measurement, please allow for slight variations in dimensions.

What's in the box
1 x 3D Printer Filament Dry Storage Cabinet
1 x Power Adapter
1 x Door Key
1 x Storage Rack
1 x User Manual