Mix Box Home Smoke Detector Sensor

Note: This product is a smoke detector sensor; it cannot operate independently and must be used in conjunction with the Mix Box wireless home security system hub (supporting WiFi/GSM). The sensor itself does not connect to WiFi or directly to a mobile app; all remote alarm functions are handled by the hub.

Emits a 90dB alarm sound accompanied by a flashing red warning light to signal an anomaly.

The smart system notifies you promptly when the battery is low, allowing for timely replacement.

Material: Plastic

Color: White

Dimensions: 10.6cm x 10.6cm x 4.15cm

Package Dimensions: 12.5cm x 12.5cm x 8cm

Weight: 0.2kg

Power Supply: 9V

Standby Current: <10uA

Operating Current: <30mA

Smoke Sensitivity: Class II

Transmission Range: >100 meters (open area)

Operating Temperature: -10 C ~ 50 C

Alarm Sound: 85dB

Transmission Frequency: 433MHz (1527/2262 protocol)

Battery Life: At least 1 year

Installation Instructions:

Select an installation location (ceiling or wall), drill two holes, insert plastic wall anchors, and secure the mounting bracket with screws.

Note: Do not disassemble the detector housing; test the device before installation to ensure it is functioning correctly.

Operating Principle: Once installed, the LED indicator flashes once every 45 seconds. When combustion particles are detected, the alarm sounds and continues until the air clears.

Pre-installation Testing: Press and hold the test button to trigger an alarm signal; the alarm will sound, the LED will flash rapidly, and a signal will be transmitted.

Release the test button to stop the alarm sound and flashing.

You can also test the device by blowing smoke into the sensor chamber; the LED will flash continuously for 11 seconds before transmitting the signal code.

It is recommended to test the device weekly to ensure it remains in proper working order. Notes:

1. The product comes with one 6F22 9V battery. 2. Do not install the device in areas with strong airflow-such as near doors, windows, or fans-as this may affect the detector's sensitivity.

2. Do not install the device in locations with high humidity or high temperatures, such as bathrooms. Please note that the operating temperature range is -10 C to +50 C.

3. Clean the detector with a soft brush every six months to maintain sensor sensitivity. Be sure to remove the battery before cleaning.

4. Various factors (including but not limited to environmental conditions, signal interference, or human interference) may affect product performance. Users are advised to take all necessary measures to ensure the safety of their property.

FAQs:

1. No alarm after pressing the test button: Please check the power supply.

2. No alarm when smoke is detected: Please clean the device to ensure the sensor is functioning correctly.

What's in the box
1 x Household Smoke Detector