Molex 2m PowerCat 6A Shielded Patch Cord LS0H Green PCD-07001-0J

Molex 2m PowerCat 6A Shielded Patch Cord LS0H Green PCD-07001-0J The Molex PowerCat 6A shielded patch cords are key components of the PowerCat 6A shielded end-to-end solution. Molex PowerCat 6A Patch Cords are designed to support high speed 10GBASE-T networks and are backward compatible with 10/100/1000BASE-T networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6A patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. Benefits 4 pair 26 AWG stranded copper wire Pre-terminated with RJ45 plugs Slim clear anti-snag slip on boots Suitable for EIA 568A or 568B wiring LS0H sheath 10G Performance when installed as a complete PowerCat 6A Shielded System Technical Specifications: Mechanical Cable Conductor Size: 26 AWG Stranded Copper Wire Screen Material: Aluminium/Polyester Shield with Tinned Copper Drain Wire Nominal Outer Diameter: 6.5 mm Sheath: Low Smoke Zero Halogen (LS0H) Bend Radius: 8 × O.D. Operating Temperature: -25°C to +75°C Plug Minimum Operating Life: 750 Insertion Cycles RJ45 Plug Material: Clear Polycarbonate (PC) Boot Material: Clear Polycarbonate (PC) Contact Plating: 1.27 µm Gold RJ45 Plug Dimensions Compliant With: ISO/IEC 60603-7 and FCC 47 Part 68 Electrical Maximum Voltage: 150 VAC (Max.) Maximum Current: 1.5 A @ 25°C Commercial Standards Standards: ANSI/TIA-568-D-2018 ISO/IEC 11801-1:2017 UL 1863 CSA C22.2 RoHS Compliant Fire Propagation Tests Standards: IEC 60332-1-1 IEC 61034-2 IEC 60754-2 PoE Supported PoE Applications: IEEE 802.3bt Type 1 to Type 4 Cisco UPoE+ HDBaseT PoH up to 100 W RP3 Compliance: EN 50174-2:2018 ISO/IEC 14763-2:2019 AS/NZS 14763.2:2020