- Average
- R 596.27
- Lowest seen
- R 468.00
- Highest seen
- R 635.00
- Last change
- -R 44.00
- First indexed
- 23 Sep 2026
- Retailer
- Takealot
Description
The resolution of the resistance measurement is 0.1 ohms, and the highest measured value is 50M ohms. Capacitance measurement range from 25pf to 100mF (100,000UF). The resolution is up to 1 pF, and the inductance measurement range is 0.01 MH-20H. Otherwise, it will be displayed as a resistor. If the DC resistance of the inductor is higher than 2100 ohms, it will also be displayed as a resistor. In the capacitance test, the VLoss displayed on the screen is the meaning of loss and attenuation. The larger the value, the closer the capacitor is to scrapping! ESR is the impedance. The smaller the value, the better the capacitor ! The detector can detect the equivalent series resistance (ESR) of capacitors above 2UF with a resolution of 0.01 ohms. This feature is very important for detecting capacitive . The two diodes can be displayed with the correct direction sign and the forward voltage drop is displayed. The LED is detected as a diode, and the forward voltage drop is higher than the normal value. The dual LEDs are detected as dual diodes. The LED will flash when it is detected. The time for each test is about two seconds. Only large capacitance and inductance measurements take a long time.
What's in the box
1 x Tester
1 x Accessory