Newavro HW-300S Digital Coating Thickness Gauge, 0-2000 m

Check paint and dry-film coating thickness with the NEWAVRO HW-300S. This compact handheld gauge combines a digital LCD readout, an integrated contact probe and a 0-2000 m measuring range in a black and grey ABS body. It is a practical tool for vehicle paint checks and coating inspection work on suitable surfaces, with an instruction manual and calibration films supplied.

FEATURES

- 0-2000 m measuring range: Measure paint and dry-film coatings within the stated range for spot checks and comparisons between locations.

- Digital LCD readout: View readings on the front display, with the controls grouped directly below the screen.

- Integrated contact probe: The probe is built into the bottom of the gauge for direct contact with the coating surface.

- Compact ABS housing: The 120 × 45 × 23 mm body fits neatly into a workshop tool kit, while the moulded lower grip grooves provide a defined holding area.

- Stated measurement accuracy: (3% + 1 m). The specified display resolution is 0.01 mm / 1 mil; resolution and accuracy describe different characteristics.

- Replaceable AAA battery power: Operates on two 1.5 V AAA batteries. Batteries are not included.

- Calibration films and instructions supplied: The package includes the gauge, instruction manual and calibration films in a white box.

EVERYDAY USE AND OCCASIONS

- Vehicle paint inspection: Take coating readings at selected points on suitable painted body panels during a vehicle inspection.

- Panel repair checks: Compare dry paint readings around a repaired area as one part of a broader bodywork assessment.

- Refinishing workshops: Spot-check completed paintwork after the coating has dried, using suitable surfaces and the instructed measurement procedure.

- Coating application checks: Compare dry paint or powder-coating thickness at different positions on a compatible coated workpiece.

- Equipment fabrication: Check painted equipment panels during finishing and inspection work.

- Maintenance inspections: Record coating readings at selected positions on suitable painted equipment surfaces for comparison during maintenance.

COMPATIBILITY

- For paint and dry-film coating thickness checks on suitable substrates. Follow the supplied manual for substrate compatibility, calibration and operating limits.

- Operating temperature: 10 C to 50 C.

USE AND CARE

- Fit two 1.5 V AAA batteries before use; batteries must be purchased separately.

- Follow the supplied instruction manual for setup and calibration using the included calibration films.

- Hold the gauge steadily with the bottom probe against the coating, following the positioning shown in the instructions.

SPECIFICATIONS

- Model: HW-300S

- Product type: Digital coating thickness gauge

- Housing material: ABS

- Product dimensions: 120 × 45 × 23 mm

- Package dimensions: 130 × 56 × 31 mm

- Gross weight (product with packaging): 97 g

- Measuring range: 0-2000 m

- Specified resolution: 0.01 mm / 1 mil

- Specified measurement accuracy: (3% + 1 m)

- Power supply: 2 × 1.5 V AAA batteries (not included)

- Operating temperature: 10 C to 50 C

- Packaging: White box

What's in the box
1 x Newavro HW-300S Coating Thickness Gauge