Nova 30 Wood Treatment & Preserver - 5lt

Nova 30 Wood Treatment & Preserver | Wood Borer, Termite & Fungal Timber Treatment

Timber Treatment & Biological Protection System

Nova 30 Wood Disinfectant is a solvent-based, ready-to-use timber treatment developed to eradicate and help prevent biological degradation in wood. The deep-penetrating formulation is designed to eliminate wood borer, termites, fungi and mould while helping protect against re-infestation when used as part of a complete timber protection system. As a non-film-forming pre-treatment, Nova 30 penetrates deep into timber fibres without affecting the natural appearance of the wood and must be overcoated with a compatible sealer, oil or varnish to complete the protection system.

KEY BENEFITS

• Eradicates wood borer, termites, fungi and mould
• Helps protect against re-infestation
• Deep-penetrating solvent-based formulation
• Does not discolour timber
• Ready-to-use with no dilution required
• Compatible with Nova timber finishes once dry

WHERE TO USE

• Interior timber surfaces
• Furniture and antiques
• Doors and window frames
• Interior ceilings and exposed beams
• Timber flooring prior to finishing
• Kitchen cabinets and timber joinery
• And many more applications

HOW TO USE

• Apply only to clean, dry, bare timber surfaces
• Remove all existing paint, varnish, wax or oil coatings before treatment
• Sand timber where required and remove all dust
• Stir before use and do not dilute
• Apply generously using a brush, spray, roller, dip method or suitable hand spray bottle
• Ensure complete saturation and penetration into the timber fibres
• For active infestations, spray directly into borer holes, cracks, joints, crevices and other difficult-to-reach areas
• Do not allow excessive pooling on the surface

Application Guide:

• Timber less than 5mm thickness: Apply 2 coats allowing approximately 30 minutes between coats
• Timber greater than 5mm thickness: Apply 3 coats allowing approximately 30 minutes between coats
• Floors and ceilings: Apply 2-3 coats at the recommended spread rate
• Allow the product to absorb fully and dry before overcoating with a compatible Nova timber finish

Critical: Nova 30 is a timber disinfectant and pre-treatment, not a decorative or protective finish. It must be overcoated with a suitable timber sealer, oil or varnish to complete the protection system. Not suitable for permanently wet, submerged or exterior exposed applications without a protective topcoat.

Tip: For timber affected by wood borer or termite activity, inject or spray Nova 30 directly into visible holes, cracks and crevices before treating the entire surface to maximise penetration and effectiveness.

WHY CHOOSE

• Deep penetration into timber fibres
• Eliminates active biological infestation
• Helps prevent future infestation when used as part of a complete system
• Does not affect timber appearance or dimensional stability
• Non-film-forming and compatible with subsequent coating systems

KEY SPECIFICATIONS

• Solvent-based timber disinfectant
• Ready-to-use formulation
• Coverage: 6m per litre
• Touch dry: 30 minutes
• Recoat time: 30 minutes
• Brush, roller, spray, dip or hand-spray application
• Clean-up with Nova 11 Cleaner & Degreaser

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

Proudly South African manufactured with decades of proven coating performance across decorative and protective timber applications.

What's in the box
1 x Nova 30 Wood Treatment & Preserver - 5lt