O2 Lambda Sensor Nissan Micra K13 Juke F15 1.2 HR12DE 22690-1HC0A AKAS

The AKAS O2 Lambda Sensor is a precision 4-wire heated replacement for Nissan Micra (K13) and Juke (F15) equipped with HR12DE 1.2L petrol engines, replacing OE 22690-1HC0A (cross-ref 226A0-1HC0A, 226A0-1KC0A).

PETROL ONLY - not compatible with diesel engines. This oxygen sensor measures exhaust oxygen concentration to provide precise air-fuel ratio feedback to the ECU - critical for optimal combustion, fuel efficiency, power delivery, and emissions control on the HR12DE 1.2L engine. Premium high-temperature construction with anti-carbon and anti-corrosion coating ensures long service life. Plug-and-play 4-pin OE connector. Backed by a 6-month limited warranty.

1. 4-Wire Heated O2 - Precise Air-Fuel Ratio Control This is a 4-wire heated oxygen sensor measuring exhaust oxygen concentration for precise air-fuel ratio feedback to the ECU. Essential for optimal combustion, fuel efficiency, power delivery, and emissions compliance on the HR12DE 1.2L engine. Replaces OE 22690-1HC0A (cross-ref 226A0-1HC0A, 226A0-1KC0A).

2. Exact OE Match - Nissan Micra/Juke 1.2 HR12DE Only Precision direct-fit sensor for Nissan Micra (K13) 2011-2017 and Juke (F15) 1.2 2014-2017 with HR12DE 1.2L petrol engines. 1:1 OE dimensions, 4-pin OE connector, M18x1.5 thread - no modification, splicing, or adapter needed. PETROL ONLY - not compatible with 1.5L (HR15DE), 1.6L (HR16DE), or diesel engines.

3. Fast Light-Off & Precision - Restores Performance & Clears CEL Integrated heating element brings the sensing element to operating temperature in under a minute, ensuring accurate oxygen concentration readings even during cold starts and short urban trips. Fast-response signal module transmits reliable oxygen data to the ECU, restoring optimal combustion, improving fuel economy, restoring power and throttle response, and clearing check engine lights (P0130/P0135/P0171/P0174 series) caused by a faulty or ageing sensor.

4. Premium High-Temp Construction - Anti-Carbon, Long Lifespan Premium high-temperature alloy probe with oxidation-resistant outer shell delivers reliable performance under harsh exhaust conditions. Anti-carbon-build-up and anti-corrosion surface treatment resists erosion from hot exhaust fumes, carbon deposits, and oil/PCV impurities - significantly prolonging service life vs. uncoated cheap sensors that fail prematurely from carbon fouling. Waterproof/dust-proof integrated sealing and anti-vibration internal circuit ensure consistent performance.

5. OE Quality at Aftermarket Value - 6-Month Warranty Manufactured to strict OE specifications with dependable detection accuracy, rapid signal feedback, solid high-heat tolerance, and anti-vibration capability - performing comparably to the NTK/Denso OE sensor at a fraction of Nissan main dealer cost. Backed by a 6-month limited warranty covering manufacturing defects. For South African Nissan Micra/Juke owners - where Nissan Micra is a popular compact hatchback and Juke is a distinctive crossover, and oxygen sensor failure is a common cause of poor fuel economy, rough idle, reduced power, and failed emissions/roadworthy tests.

Product Specifications

Product Type: O2 Lambda Sensor / Oxygen Sensor (4-Wire Heated)

Sensor Type: Narrowband Switching-Type (ZrO2)

Primary OE: 22690-1HC0A

Connector: 4-Pin OE-Matching (Plug-and-Play)

Mounting Thread: M18 x 1.5

Heating: Integrated Heater (Fast Light-Off)

Signal Output: Narrowband Switching (0.1V-0.9V)

Operating Temperature: Up to 750 C+ (Exhaust)

Body: High-Temp Alloy Probe + Oxidation-Resistant Shell

Coating: Anti-Carbon & Anti-Corrosion

Sealing: Waterproof & Dust-Proof Integrated

Compatible Models - 1.2L PETROL ONLY

Nissan:

- Micra (K13) (2011-2017) - HR12DE 1.2L

- Juke (F15) 1.2 (2014-2017) - HR12DE 1.2L

Engine Compatibility

Engine Family: HR12DE (DOHC 12V)

Displacement: 1.2L (1198cc) Inline-3 Petrol

Power: 59-63kW (varies by market)

Fuel: Petrol Only

NOT compatible with: 1.5L (HR15DE)

NOT compatible with: 1.6L (HR16DE / MR16DDT)

NOT compatible with: Diesel engines (1.5 dCi K9K)

Note: Verify original OE number and engine code before purchase.

OE Cross-Reference

Primary OE: 22690-1HC0A

Cross-Reference: 226A0-1HC0A, 226A0-1KC0A (Interchangeable)

Note: Verify original OE number, engine code, and sensor position (upstream vs downstream) before purchase.

1.2L PETROL ONLY - VERIFY COMPATIBILITY: This sensor fits ONLY Nissan Micra (K13) and Juke (F15) with HR12DE 1.2L petrol engines, replacing OE 22690-1HC0A (cross-ref 226A0-1HC0A, 226A0-1KC0A). NOT compatible with 1.5L/1.6L, NOT with diesel, NOT for other OE numbers. Check original OE number and engine code before purchase.

VERIFY SENSOR POSITION: This vehicle may have multiple oxygen sensors (upstream/pre-cat and downstream/post-cat). Verify the exact position (Bank 1 Sensor 1 vs Bank 1 Sensor 2) and connector type before purchase. Upstream and downstream sensors are NOT interchangeable.

4-WIRE HEATED - VERIFY CONNECTOR PIN COUNT: This is a 4-wire heated oxygen sensor. Ensure the connector has 4 pins before installation. Do NOT substitute with a 1-3 wire unheated sensor or a 5-wire wideband AFR sensor - they are electrically and functionally different and will cause incorrect readings and persistent check engine lights.

PROFESSIONAL INSTALLATION: Recommended for proper torque (30-45 Nm), correct cable routing away from heat sources and moving parts, and clearing of diagnostic trouble codes (DTCs) after replacement. Allow exhaust to cool completely (30-60 min) before servicing. Do not over-tighten. If the mounting bung thread is damaged or carbon-fouled, clean/repair before installation.

WARRANTY: 6-month limited warranty covering manufacturing defects under normal use. Does not cover improper installation, drops, contamination, water ingress, use on incompatible vehicles/engines, wrong position, modification, or normal wear. This is an aftermarket replacement part - not affiliated with or manufactured by Nissan, NTK, or Denso.

What's in the box
1 x Oxygen Sensor