OTTOCAST 5 Inch Motorcycle Wireless CarPlay Android Auto Display

Motorcycle Compatibility: This product is designed primarily for motorcycles and vehicles with a suitable 12V to 24V power supply and compatible handlebar mounting space.

• Power Requirement: Please confirm that your vehicle provides a 12V to 24V power supply before purchase.
• CarPlay and Android Auto: Wireless CarPlay and wireless Android Auto require a compatible smartphone and supported operating system.
• Phone Compatibility: Please confirm that your smartphone supports the required CarPlay or Android Auto function before purchase.
• Bluetooth Headset: Compatibility with Bluetooth helmets and headsets may vary depending on the headset model and connection configuration.
• Mounting: Please check the handlebar diameter and available mounting space before purchase to ensure the supplied mounting kit is suitable.
• Water Resistance: The device is rated IPX7 for water protection. Make sure all applicable connections are correctly installed and protected before riding in wet conditions.
• Memory Card: The device supports TF cards up to 128GB. A Class 10 high-speed card is recommended.
• Important: This product does not replace the motorcycle's original control, navigation or safety systems. Always operate the device responsibly and comply with local traffic regulations.

Product Overview

The 5-Inch Motorcycle Wireless CarPlay and Android Auto Touchscreen Display is designed for motorcycle riders who want convenient access to compatible smartphone functions through a larger, dedicated display.

It supports wireless Apple CarPlay and wireless Android Auto, allowing compatible smartphones to access supported navigation, music, calls and other functions through the motorcycle display.

The compact design, IPX7 water resistance and wide operating temperature range make it suitable for a variety of outdoor riding environments.

Key Features

Wireless CarPlay and Android Auto

Supports both wireless CarPlay and wireless Android Auto, providing convenient access to compatible smartphone functions without requiring a direct phone-to-display cable connection.

Available functions depend on the connected smartphone, operating system and supported applications.

5-Inch IPS Touchscreen

Features a 5-inch IPS display with an 854 x 480 resolution.

The touchscreen provides a larger interface than a typical smartphone display and allows compatible functions to be accessed directly from the motorcycle-mounted screen.

Motorcycle-Focused Design

Designed for motorcycle use with a compact housing and mounting solution.

The supplied mounting kit allows the display to be attached to suitable motorcycle handlebars. Always confirm the handlebar size and mounting space before installation.

IPX7 Water Resistance

The device features an IPX7 water-resistant design, helping protect the unit from water exposure during outdoor use.

For best results, ensure that power and other connections are properly installed and protected.

Dual-Band Wi-Fi

Supports dual-band Wi-Fi connectivity at:

• 2.4GHz
• 5.8GHz

The available wireless connection speed and stability may vary depending on the smartphone, network environment and surrounding conditions.

Bluetooth 5.0

Supports Bluetooth 5.0 for wireless communication with compatible devices.

Depending on the connection configuration, the device can be used with compatible Bluetooth helmets or headsets for supported audio and calling functions.

Voice Assistant Support

The device supports compatible voice assistant functions such as Siri and Google Assistant through supported smartphones.

Depending on the connected phone and application, riders can use voice commands for supported functions such as:

• Navigation
• Phone calls
• Music
• Other compatible voice assistant features

Voice assistant availability depends on the smartphone, operating system and connected applications.

Bluetooth Helmet and Headset Support

The device is designed to work with compatible Bluetooth helmets and headsets.

This allows riders to access supported audio and calling functions through a compatible Bluetooth audio device.

Actual compatibility may vary depending on the helmet, headset and smartphone.

GPS and Ride Data Functions

The device supports GPS-related functions, including:

• GPS positioning
• Route tracking
• Track recording
• Altitude display and recording

Available GPS information may vary depending on GPS signal conditions and the operating environment.

G-Sensor

The built-in G-Sensor supports adjustable sensitivity settings:

• High
• Medium
• Low

The adjustable sensitivity allows the device to be configured for different riding conditions.

Tyre Pressure Monitoring

The device includes support for a tyre pressure monitoring function through the built-in monitoring system.

Additional compatible tyre pressure monitoring sensors or accessories may be required depending on the specific product configuration.

Electronic Image Stabilisation

Supports electronic image stabilisation to help reduce image movement during use.

Actual stabilisation performance may vary depending on riding conditions, road surface and vibration levels.

TF Card Support

The device features an external TF card slot and supports memory cards up to 128GB.

A Class 10 high-speed TF card is recommended for compatible recording and storage functions.

Installation

The display is designed for straightforward motorcycle installation using the supplied mounting hardware.

General installation steps:

1.Select a suitable mounting position on the motorcycle handlebar.

2.Secure the mounting bracket using the supplied hardware.

3.Connect the device to the vehicle's suitable 12V to 24V power supply.

4.Secure the wiring away from moving or hot components.

5.Turn on the device and complete the initial setup.

6.Pair a compatible smartphone and begin using supported functions.

Installation time may vary depending on the motorcycle model and mounting location.

Wide Voltage Input

Supports a 12V to 24V power input, making the device suitable for compatible vehicles within this voltage range.

Always confirm the vehicle's electrical specifications before installation.

Operating Environment

• Operating Temperature: -10 C to 60 C
• Storage Temperature: -10 C to 70 C
• Water Resistance: IPX7
• Power Input: 12V to 24V

Product Specifications

• Product Type: Motorcycle Wireless CarPlay and Android Auto Display
• Display Size: 5 inches
• Display Type: IPS
• Resolution: 854 x 480
• CPU: ARM Cortex-A7 1.2GHz
• Bluetooth: Bluetooth 5.0
• Wi-Fi: Dual-Band 802.11 connectivity
• Wi-Fi Frequency: 2.4GHz / 5.8GHz
• Operating System Support: Wireless CarPlay and Wireless Android Auto
• TF Card Support: Up to 128GB
• Recommended TF Card: Class 10 high-speed card
• GPS: Supported
• G-Sensor: Adjustable High / Medium / Low sensitivity
• Tyre Pressure Monitoring: Supported
• Electronic Image Stabilisation: Supported
• Power Input: 12V to 24V
• Operating Temperature: -10 C to 60 C
• Storage Temperature: -10 C to 70 C
• Water Resistance: IPX7
• Dimensions: 80mm x 80mm x 20.5mm
• Net Weight: Approximately 310g
• Colour: Black

Designed primarily for compatible:

• Motorcycles
• Three-wheel vehicles
• Off-road vehicles
• Personal watercraft
• Snowmobiles

Compatibility depends on the vehicle's power supply, mounting space, electrical system and smartphone connectivity.

Package Contents

• 1 x Motorcycle Wireless CarPlay and Android Auto Display
• 1 x Mounting Bracket / Mounting Kit
• 1 x Power Cable
• 1 x Installation Hardware Set
• 1 x User Manual

Product Benefits

• Wireless CarPlay support
• Wireless Android Auto support
• 5-inch IPS touchscreen
• 854 x 480 display resolution
• Bluetooth 5.0
• Dual-band 2.4GHz / 5.8GHz Wi-Fi
• IPX7 water resistance
• GPS tracking support
• G-Sensor with adjustable sensitivity
• Tyre pressure monitoring support
• Electronic image stabilisation
• TF card support up to 128GB
• 12V to 24V wide voltage input
• Compact motorcycle-friendly design
• Compatible with selected Bluetooth helmets and headsets

What's in the box
1 x Motorcycle Wireless carplay box