RCT 10000VA/8000W Online Tower UPS 10000-WPTU

RCT 10000VA/8000W Online Tower UPS 10000-WPTU The RCT 10000-WPTU is a high-capacity online tower UPS designed to protect compatible business, networking and IT equipment from power interruptions and unstable mains conditions. Its 10,000 VA / 8,000 W capacity, pure sine-wave output and zero-millisecond line-to-battery transfer help maintain consistent power to connected equipment during an outage. A wide input voltage range allows the UPS to continue operating through varying mains conditions, while its integrated battery system provides temporary backup power for an orderly shutdown or continued short-term operation. An LCD control panel, USB communication and optional network management make it practical to monitor and manage within a professional installation. Reliable Online Power Protection Online operation continuously conditions the incoming power before supplying connected equipment. This helps isolate compatible loads from interruptions and voltage variations, making the UPS suitable for servers, network infrastructure, telecommunications equipment and other business-critical systems within its rated capacity. Key Features: 10,000 VA / 8,000 W capacity: Supports demanding business and IT equipment within the UPS load rating. Online UPS operation: Delivers conditioned output power for equipment that requires stable electrical protection. Zero-millisecond transfer: Provides a 0 ms line-to-battery transfer time, helping connected equipment continue operating without a switching delay. Pure sine-wave output: Supplies a clean waveform suitable for compatible electronic and computing equipment. Wide input range: Operates down to 110 V AC at 50% load or 176 V AC at full load, with a 300 V AC upper limit. Integrated battery system: Includes 16 × 12 V / 9 Ah batteries and can recover up to 90% capacity in approximately nine hours. Monitoring and management: Includes an LCD status display and USB connectivity, with RS-232 and optional SNMP management support depending on configuration. Power and Battery Management The front LCD panel displays operating, load, battery, voltage, frequency and fault information to assist with day-to-day monitoring. Audible alarms and status indicators provide notification of battery operation, low battery conditions, overloads and faults. Overload, discharge and overcharge protection help safeguard the UPS and its batteries. Converter mode can also provide a fixed 50 Hz or 60 Hz output where required, subject to the capacity derating specified by the manufacturer. Installation Notice This is a high-capacity, hardwired UPS intended for commercial or industrial applications. Installation and electrical wiring must be completed by suitably qualified personnel in accordance with local electrical regulations. The UPS is intended to provide temporary backup power and power conditioning; its available runtime will depend on the connected load, battery condition and operating environment. Technical Specifications: Specification Details Brand RCT Model / MPN 10000-WPTU Product Type Online tower uninterruptible power supply Rated Capacity 10,000 VA / 8,000 W Phase Single-phase with ground Input Voltage Range 110 V AC ±3% at 50% load; 176 V AC ±3% at 100% load; high-line limit 300 V AC ±3% Input Frequency Range 46–54 Hz on a 50 Hz system; 56–64 Hz on a 60 Hz system Input Power Factor ≥0.99 at 100% load Selectable Output Voltage 208 / 220 / 230 / 240 V AC Output Voltage Regulation ±1% Battery-Mode Frequency 50 Hz ±0.1 Hz or 60 Hz ±0.1 Hz Output Waveform Pure sine wave Transfer Time 0 ms, line to battery; 0 ms, inverter to bypass Current Crest Ratio 3:1 maximum Harmonic Distortion ≤3% THD with a linear load; ≤5% THD with a non-linear load Efficiency More than 93% in AC mode; more than 91% in battery mode Installed Batteries 16 × 12 V / 9 Ah batteries Nominal Battery Energy 1,728 Wh Recharge Time Approximately nine hours to recover 90% capacity Display LCD panel with LED operating-status indicators Communication USB; smart RS-232 support and optional SNMP management Emergency Power Off EPO connector Operating Temperature 0°C to 40°C Operating Humidity Less than 95%, non-condensing Recommended Operating Altitude Below 1,000 m without output-power derating Acoustic Noise Less than 58 dB at 1 metre Dimensions 442 × 190 × 688 mm (D × W × H) Net Weight Approximately 66 kg Warranty One year on electronics; six months on batteries Package Contents UPS, user manual, monitoring software, USB cable and applicable supplied accessories Runtime is load-dependent and may vary according to battery condition, operating temperature and connected equipment. Capacity must be derated when operating in converter mode or when the output is set to 208 V AC. Output must also be derated when installed above 1,000 metres. Protect compatible business and IT equipment with high-capacity online backup power and add the RCT 10000-WPTU to your cart today.