Ryobi 18 V Cordless Li-Ion 5-Piece Power Tool Combo Kit - Angle Grinder and Impact Drill (XCB-5K)

The Ultimate Heavy-Duty Twin-Pack Ecosystem for Drilling, Slicing, and Site Prepping

(Note: Batteries and chargers are included)

 

The Ryobi XCB-5K 18V Cordless 5-Piece Combo Kit is an all-inclusive, professional-grade fabrication and fastening solution engineered to deliver ultimate workplace independence. Anchored by two high-performance core machines—a high-torque 18V Impact Drill/Driver and a rugged 115mm Angle Grinder—this industrial package provides contractors, tradespeople, and workshop fabricators with uncompromised cutting, grinding, and masonry-boring capability. Operating on the unified Ryobi 18V Lithium-Ion platform, the kit includes two high-capacity 4.0Ah (4000mAh) battery packs and an optimized charger, ensuring a non-diminishing, continuous workflow with minimal down-time. Bundled alongside a comprehensive 59-piece master accessory array and housed inside a robust, blow-molded storage system, this heavy-duty combo kit offers a powerful out-of-the-box solution for structural carpentry, electrical routing, and site maintenance.

 

Key Kit Component Breakdowns

1. 18V High-Torque Multi-Mode Impact Drill

• Dynamic Powertrain Performance: Delivers a massive 66Nm of maximum torque to conquer stubborn structural timber boring and high-resistance fastening.

• Dual-Speed Mechanical Gearbox: Low-gear setting (0–500 rpm) optimizes driving force for long coach screws, while the high-gear setting (0–2,000 rpm) provides rapid boring execution.

• Integrated Percussion Hammer Function: Incorporates a heavy-hitting mechanical impact selector to drill swiftly through tough concrete, masonry, and brick surfaces.

• Boring Capacity Envelope: Effortlessly handles hole diameters up to 35 mm in wood, 13 mm in steel, and 13 mm in concrete.

• Base Foot LED Task Light: Projects a clear, shadow-free light beam straight onto target lines when working in dark room corners or deep cabinets.

2. 18V Heavy-Duty 115mm Angle Grinder

• High-Velocity Slicing Power: Rotates at a steady 8,500 min⁻¹ no-load velocity, ensuring clean material removal and fast, non-binding metal cuts.

• Unique Thermal Dissipation Layout: Engineered with advanced ventilation pathways that optimize motor cooling under prolonged cutting stresses.

• Soft-Start Safety Electronics: Gradually ramps up motor rotation to full velocity upon trigger pull, preventing sudden torque twist or wrist snapback.

• Tool-Less Safety Wheel Guard: Rapid-adjust guard latch can be rotated and locked into position instantly without requiring a screwdriver.

• 3-Position Auxiliary Side Handle: Versatile side assist handle mounts to the left, right, or top of the gear housing for total ergonomics during flat grinding or vertical slicing.

 

Technical Specifications (Combined System)

• Model Code: XCB-5K

• Kit Classification: 5-Piece Comprehensive Cordless Power Tool System

• System Operating Voltage: DC 18V

• Power Supply Included: 2 x 18V 4.0Ah (4000mAh) Lithium-Ion Battery Packs

• Charging Infrastructure: Included High-Dock Charger (~95-minute full cycle time)

• Compatible Charger Network: Ryobi XPP-4200 & XPP-9000

• Impact Drill Torque / Clutch: 66Nm Maximum Output | Variable Speed Pre-selection

• Angle Grinder Capacity: 115 mm Disc Diameter / M14 Spindle Thread

• Total Combined Kit Nett Weight: 5.9 kg

 

Industrial and Trade Applications

• On-Site Construction & Framing: Boring structural anchor plug holes into concrete foundations, and driving heavy-gauge coach screws into timber frames.

• Metalwork & Welding Fabrication: Slicing through structural steel profiles, squaring up rebar pins, cleaning weld beads, and deburring metal plates with the 115mm grinder.

• Mechanical & Electrical Reticulation: Cutting metal cable trays, scoring concrete wall chases for electrical conduits, and fastening equipment racks.

• General Facility Maintenance: Providing a highly portable, cordless emergency tool solution for facility breakdowns, pipeline slicing, and rapid lock or bracket repairs.

 

What’s in the Box? (The 5-Piece Breakdown)

• 1 x Ryobi 18V Multi-Function Impact Drill Body

• 1 x Ryobi 18V 115mm Angle Grinder Body

• 2 x Ryobi 18V 4.0Ah (4000mAh) Heavy-Duty Lithium-Ion Battery Packs

• 1 x Optimized Battery Docking Charger Station

• 1 x 49-Piece Master Drill and Screwdriver Bit Accessory Set (Housed in dedicated trays)

• 1 x 10-Piece Professional 115mm Metal Cutting Abrasive Disc Pack

• 1 x 3-Position Grinder Side Handle & Disc Flange Spanner Wrench

• 1 x Heavy-Duty Blow-Molded Storage Organizer Carry Case

• 2 x Comprehensive User Operation and Safety Manuals

 

Frequently Asked Questions (FAQ)

1. Why is this package referred to as a "5-Piece" Combo Kit? In accordance with professional tool trade standards, the "5-piece" description represents the five core components that form the backbone of the system's value: (1) The Impact Drill Body, (2) The Angle Grinder Body, (3) The First 4.0Ah Battery, (4) The Second 4.0Ah Battery, and (5) The Charging Station. The storage case and 59 loose accessories are included as bonus master packs.

2. What is the benefit of getting two 4.0Ah batteries instead of standard 2.0Ah packs? Angle grinders are high-draw power tools that drain compact batteries quickly. By supplying two heavy-duty 4.0Ah (4000mAh) battery packs, Ryobi ensures the tools have a deep power reservoir. This allows you to run the grinder on one battery while the second pack tops up in the charger, providing a non-stop, continuous operational cycle on site.

3. Can I use the drill to mix small batches of grout or tile mortar? With a strong 66Nm maximum torque rating, the drill can comfortably handle light mixing of thin-set adhesives or paints when paired with a matching hex-shank mixing paddle on low gear (Gear 1). However, always run the tool at a controlled pace and avoid binding to prevent motor overload.

4. How should I care for the angle grinder to maintain its lifespan? Regularly blow out the cooling vents with compressed air to clear away metallic dust, which can accumulate over time and short circuit electrical contacts. Ensure the fine micro-mesh ventilation points remain unblocked, and never apply excessive downward force during cutting—let the tool's 8,500 rpm rotational velocity do the work.