Shure BLX24R/PG58 - Wireless Rack-Mount Vocal System with PG58 Microphone

Overview

The Shure BLX24R/PG58 Wireless Rack-mount Vocal System combines professional-quality sound with simple setup and up to 14 hours battery life for legendary audio performance right out of the box. The system includes BLX4R half-rack single-channel receiver, PG58 handheld transmitter, microphone clip, power supply, 2 AA batteries, and user guide.

Details

SUPERIOR AUDIO - Perform with Confidence

Get the show going with no wires attached. Professional Shure sound for every band and any vocal need.

RELIABLE SIGNAL - Extend your range

With a range of up to 300 feet (100m), you can take the show into the crowd without interruption.

EASY SETUP - Own the stage

BLX will have you up and running in record time with one-touch scan and selection.

BATTERY LIFE - 14 hours of power

Because BLX transmitters get up to 14 hours of power from a single pair of AA batteries, the show can go on and on (and on).

SYSTEMS EXPANSIONS - Run up to 12 channels per frequency bandx

You'll probably need to find a bigger stage before you run out of channels.

xNote: region and environment dependent.

VERSATILITY INCLUDED - You've got options

An impressive variety of Shure microphones are available in BLX systems, so you can find what works for you.

System Specifications

Working Range: 91 m (300 ft) Line of Sight Note: Actual range depends on RF signal absorption, reflection and interference.

Audio Frequency Response: 50 to 15,000 Hz Note: Dependent on microphone type

Total Harmonic Distortion: Ref. 33 kHz deviation with 1 kHz tone 0.5%, typical

Dynamic Range: 100 dB, A-weighted, typical

Operating Temperature: -18 C (0 F) to 57 C (135 F)

Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.

BLX4R Receiver Specifications

Output Impedance

XLR connector: 200

6.35 mm (1/4") connector: 50

Audio Output Level Ref. 33 kHz deviation with 1 kHz tone:

XLR connector: -20.5 dBV (into 100 k load)

6.35 mm (1/4") connector: -13 dBV (into 100 k load)

RF Sensitivity: -105 dBm for 12 dB SINAD, typical

Image Rejection: >50 dB, typical

Dimensions: 1.65 in. X 7.80 in.X 6.42 in. (42 mm X 198 mm X 163 mm) H x W x D

Weight without antennas: 2.2 lbs (998 g)

Housing: Molded ABS, steel

Power Requirements: 12-15 V DC @ 260 mA, supplied by external power supply (tip positive)

BLX2 Handheld Specifications

Audio Input Level:

0dB: -20 dBV maximum

-10dB: -10 dBV maximum

Gain Adjustment Range: 10 dB

RF Transmitter Output: 10 mW, typical (varies by region)

Dimensions: 8.82 in. X 2.09 in. (224 mm X 53 mm) L x Dia.

Weight: 7.7 oz. (218 g) without batteries

Housing: Molded ABS

Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline

Battery Life: up to 14 hours (alkaline)

What's in the box
1 x BLX4R Half-rack single-channel receiver
1 x PG58 Handheld Transmitter
1 x Rack Mount Bracket
1 x Long Rack Mount Bracket
1 x Link Bracket
1 x HARDWARE KIT
1 x Swivel Adapter
1 x Thread Adapter
2 x Antenna/Bnc,1/4 Wave
2 x Adapter,Bulkhead,Bnc
1 x Bag Vinyl, Zippered
2 x Cable,BNC,22 In.
1 x Power supply