Speroni Controller Pump Auto Pc-58 25Mm 1.1Kw 230V - 4 Pack

Key Specifications

Inlet/Outlet Size: 25 Mm (Also Listing As 32 Mm Option)

Supply Voltage: 220-240 V (Single Phase)

Maximum Motor Power: Up To 1.1 Kw

Maximum Current: 10 A

Maximum Working Pressure: 10 Bar
Maximum Water Temperature: 60 C

Protection Class: Ip65 (Suitable For Outdoor Or Damp Environments)

Functionality: Automatic Start/Stop Based On Tap Opening/Closing, Plus Dry-Run Protection.

Typical Applications

Home/Domestic Water Pressure Boosting Systems: The Controller Will Start The Pump When A Tap Is Opened And Stop When Closed.

Garden Irrigation Systems Where Automatic Operation Is Required.

Areas Where Dry-Run Protection Is Important (I.E., When A Pump Might Run Without Water).

Systems That Require Weather-Resistant Or Outdoor-Rated Control Units (Thanks To Ip65).

Installation & Usage Tips

Ensure The Pump Motor You Pair With Does Not Exceed 1.1 Kw If This Is The Correct Variant (Or Choose A Higher Rated Controller If Your Pump Is Larger).

The 25 Mm Outlet Means Your Plumbing Should Match Or Adapt Accordingly.

Check Wiring: Since It Supports Up To 10 A, Ensure The Cable, Breaker, And Isolation Meet Local Standards For Safety.

Mounting Location Should Be Relatively Protected From Harsh Weather, Even Though Unit Is Ip65-Rated; Protect From Direct Sun, Severe Dust, Heavy Corrosion.

If Your System Has A Pressure Vessel (Expansion Tank), Ensure It'S Correctly Sized Because The Controller Will Respond To Flow Changes.

Verify That The Controller Has The Correct Inlet/Outlet Threading And Check Whether Any Additional Fittings Or Adaptors Are Needed For Your Plumbing.

Ensure The Dry-Run Feature Works By Periodically Checking If The Pump Tries To Start When No Water Is Available (Good For Detecting Leaks Or Empty Tanks).

Before Commissioning, Bleed Air From System And Check For Correct Pressure And Flow Performance.

What's in the box
4 x Speroni Controller Pump Auto Pc-58 25Mm 1.1Kw 230V