Sun Command Solar DIY Pool Heating - 3 Panel Kit

SUN COMMAND solar pool heating panels used in conjuction with a pool cover, increase the temperature of pool water by 8 to 12 Degrees for most pools in South Africa.

SIZING OF SYSTEM:

FOR OUTDOOR POOLS in FULL SUN with panels on noth-facing roof:

• Use 1 or more panels for every 10 000 Litre of water. Add more panels to add more heat
• Always use in conjunction with a pool cover to reduce evaporation and retain heat
• Water circulation pump needs to be sufficent to ensure maximum heat absorbsion. 

FOR INDOOR POOLS with panels on noth-facing roof:

• Use 1 or more panels for every 5 000 Litre of water.
• Use of a pool cover is required

DIY Kits includes the following:

3m Sun Command Solar Panels
Backing sheets
EPDM rubber panel connectors
Clamps for panel connectors
2 x EPDM rubber End Caps
2 x 50mm PVC-Poly Adaptor
20 x 50mm PVC Elbows
4 x 50mm PVC Connectors
3 x 50mm PVC T-Piece
4 x 50mm PVC 45 Deg fittings
1 x Ball Valve Glued - drill 8mm hole {Bypass ballvalve}
2 x Ball Valve Glued {Shut-off ballvalves}
1 x 50mm PVC Non-return valve
1 x PVC tank adaptor
1 x Nylon Reducing bush
1 x Vacuum breaker
2 x PTFE Tape
Nylon Ski Rope for tie-down of panels to the brandering of tiled roofs

Excluded:

• Tie-down bracket used on metal roofs

Installation instructions:

•  Please follow detail installation instruction as provided in the DIY kit 

Carry-in Factory Warranty

• 6 Months
• The carry-in warranty will be extended to 5 Years subject to approval of the installation by Seller
• Factory branches are in Pretoria, Centurion, Johannesburg, Durban, Cape Town, Knysna and Port Elizabeth

IMPORTANT:

• The product is not suitable for use on thatched roofs