Sunnew 5.12KWh 100Ah Wall Mount Lithium Battery Module SNP5.12KWH

Sunnew 5.12KWh 100Ah Wall Mount Lithium Battery Module The Sunnew SNP5.12KWH is a 51.2V DC lithium iron phosphate battery module designed for compatible residential and commercial inverter energy-storage systems. It combines a rated capacity of 100Ah with 5.12kWh of stored energy, providing a practical foundation for solar energy storage, backup power and off-grid installations. Its wall-mounted enclosure creates a tidy installation while helping to preserve valuable floor space. The battery should be installed and configured by a suitably qualified technician, with inverter compatibility and communication requirements checked before installation. Store Energy for When It Is Needed When connected to a compatible inverter and correctly designed energy system, the battery can store energy generated by a solar installation or supplied from another supported charging source. That stored energy can then help support selected electrical loads when solar production is low or grid power is unavailable. Space-Conscious Wall-Mounted Design The wall-mount format keeps the battery securely positioned without occupying a conventional floor-standing footprint. Measuring 600 x 420 x 175mm, the enclosure can be incorporated into suitably protected indoor energy installations where adequate ventilation, access and structural support are available. LiFePO4 Battery Technology The SNP5.12KWH uses lithium iron phosphate battery chemistry and operates at a nominal voltage of 51.2V DC. Sunnew specifies charging and discharging efficiency of 95%, a maximum continuous discharge current of 100A and a manufacturer-rated cycle life of more than 6,000 cycles under the manufacturer’s applicable operating conditions. Key Features: Provides 5.12kWh of rated energy storage for compatible inverter and solar energy systems. Combines a 51.2V nominal voltage with a 100Ah rated battery capacity. Uses lithium iron phosphate battery chemistry for stationary energy-storage applications. Wall-mounted design helps maintain a neat installation and keeps floor space clear. Supports a maximum continuous discharge current of 100A. Manufacturer-rated charging and discharging efficiency of 95%. Optional CAN and RS485 communication may support integration with compatible inverter systems. Suitable Applications: Residential solar energy storage Backup power systems Compatible hybrid inverter installations Off-grid energy systems Small commercial energy-storage installations Compatibility and Installation This is a 51.2V DC battery module and must be paired with equipment designed to operate within its specified voltage and current limits. Before purchase, confirm the inverter’s approved battery list, charging profile, communication protocol and required cables. CAN and RS485 communication are listed by Sunnew as optional and may depend on the supplied battery configuration. The battery has an IP21 enclosure rating and should be installed in an appropriate protected location. Installation, mounting, electrical protection and system commissioning should be completed by a suitably qualified installer in accordance with the manufacturer’s instructions and applicable electrical regulations. Technical Specifications: Specification Details Brand Sunnew Model SNP5.12KWH Product Type Wall-mounted inverter battery module Battery Chemistry Lithium iron phosphate (LiFePO4) Rated Energy 5.12kWh / 5,120Wh Rated Capacity 100Ah Nominal Voltage 51.2V DC Working Voltage Range 43.2V to 57.6V DC Charging Voltage 57.6V to 58.4V DC Standard Charge 20A constant current; 57.6V constant voltage Standard Discharge 20A constant current; 43.2V discharge end voltage Maximum Continuous Charge Current 100A Maximum Continuous Discharge Current 100A Charging and Discharging Efficiency 95% Manufacturer-Rated Cycle Life More than 6,000 cycles Charge Operating Temperature 0°C to 45°C Discharge Operating Temperature -20°C to 60°C Warranty 9 Year Carry-in Communication Optional CAN and RS485; confirm supplied configuration Cell Configuration 16 cells in series Enclosure Protection Rating IP21 Installation Type Wall mounted Dimensions 600 x 420 x 175mm Weight 49kg Manufacturer-Listed Certifications CE, RoHS and UN38.3 Battery runtime depends on the connected load, inverter efficiency, configured depth of discharge and overall system design. Confirm compatibility, communication support, mounting requirements and the locally applicable warranty with the supplier before installation. Add the Sunnew SNP5.12KWH to a compatible energy system for practical 5.12kWh battery storage and buy online today.