SUPERPURE 14L Water Dispenser with Filters & Mineral Pot

Taste the Difference, Experience Purity

Ditch the worry and enjoy fresh, delicious water every day with the SUPERPURE 14L Water Dispenser. Its powerful 7-stage filtration system removes 99.99% of harmful contaminants like chlorine, lead, and microplastics, leaving you with clean, revitalized water that's:

• Healthier: Free from harmful impurities, promoting better overall health and well-being.
• Tastier: Say goodbye to flat, metallic-tasting water! Enjoy naturally enhanced flavor and improved odor for a truly refreshing experience.
• Mineral-Rich: Infused with essential minerals like magnesium and calcium for added health benefits and a delicious taste.

Effortless Convenience, Long-Lasting Value:

• Countertop Design: No plumbing required, enjoy instant, filtered water anywhere in your home.
• Easy Setup & Cleaning: Simple instructions and user-friendly design make setting up and maintaining your dispenser a breeze.
• Long-Lasting Filters: The ceramic filter lasts up to 2 years, while the Multi-Stage filter tackles up to 5,000L, saving you money and time on replacements compared to bottled water.

Sustainable & Family-Friendly:

• Large 14L Capacity: Provides ample fresh water for everyone in your household, reducing reliance on plastic bottles.
• Eco-Friendly Choice: Ditch single-use filters and contribute to a healthier planet with a sustainable solution.

Installation Instructions:

Step 1: Remove packaging and soak all 3 filters in clean water for 30 minutes. Rinse off well before continuing.

Step 2: Install tap into bottom tank. Ensure that one o-ring is placed on the inside and one o-ring is placed on the outside. Check that tap is centered to prevent leaks.

Step 3: Place bottom tank on filter base.

Step 4: Place mineral stones filter into bottom tank.

Step 5: Install spacer ring.

Step 6: Install multi-stage filter cartridge into filter hanger.

Step 7: Place filter hanger assembly into spacer ring.

Step 8: Inspect ceramic filter for cracks or loose base. If damaged, bacteria will not be filtered out from the system and may run through the system too quickly, causing leaks.

Step 9: Install ceramic filter into top tank. Ensure that one o-ring is installed on the inside and outside of the tank before installing the nut. Very Important! Check that the filter is centered and that there are no gaps around the o-rings as this can cause water to leak past the ceramic filter.

Step 10: Place top tank onto spacer ring.

Step 11: Place lid onto top tank. Installation is now complete and the system is ready to use. We recommend running one tank of water through the system and discarding it before first use.

Troubleshooting

Q: Water is leaking from the filter unit.

• A: Unit is overfilled - Top tank filled while bottom tank more than 1/3 full.
• A: Ceramic filter is not properly centered as described in Step 9.
• A: Tap not centered as described in Step 2.
• A: Ceramic filter cracked/damaged.

Q: Water runs through very slowly.

• A: The filters have not been soaked/primed.
• A: The filter is gravity-feed, so it does take a few hours to filter through - this is normal.

What's in the box
1x Lid
1x Upper Tank
1x Middle Base
1x Ceramic Dome Filter
1x Cartridge Hanger
1x Multi-Media Cartridge
1x Mineral Stone
1x Lower Tank
1x Tap
1x Bottom Base
1x User Manual