Teltonika Outdoor 4G Router OTD140

Teltonika Outdoor 4G Router OTD140 The OTD140 outdoor router features a dedicated and durable IP55 plastic housing and an integrated mounting bracket, making this outdoor 4G router easy to deploy and capable of withstanding outdoor environmental conditions. Beyond that, this outdoor router is equipped with LTE Cat 4 connectivity, compatibility with RMS for remote management capabilities, and two PoE-in/out Ethernet ports. Specifications: Mobile Mobile module: 4G LTE up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Mbps 3GPP Release: Release 9 SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, MNC SMS: SMS status, SMS configuration, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP USSD: Supports sending and reading Unstructured Supplementary Service Data messages Block/Allow list: Operator block/allow list (by country or separate operators) Band management: Band lock, used band status display SIM PIN code management: Enables setting, changing, or disabling the SIM card’s PIN APN: Auto APN Bridge: Direct connection (bridge) between mobile ISP and device on LAN Passthrough: Router assigns its mobile WAN IP address to another device on LAN Ethernet LAN: 2 x ETH ports (can be configured as WAN), 10/100 Mbps, IEEE 802.3/802.3u/802.3az compliant, supports auto MDI/MDIX PoE In ports: 1 x PoE In PoE In standards: 802.3af/at PoE Out ports: 1 x PoE Out PoE Out standards: 802.3af Alternative B PoE Max Power per Port (at PSE): 15 W Max (power supply unit dependent) Network Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN VoIP passthrough support: H.323 and SIP-ALG protocol NAT helpers Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall: Port forward, traffic rules, custom rules, TTL target customization Firewall status page: View all Firewall statistics, rules, and rule counters Ports management: View, enable, disable ports; auto-configuration toggle; transmission speed control Network topology: Visual representation of device connections DHCP: Static/dynamic IP allocation, DHCP relay, DHCP server configuration, static leases with MAC wildcards QoS / SQM: Traffic priority by source/destination, service, protocol, port, WMM, 802.11e DDNS: Supported by over 25 providers; others configurable manually DNS over HTTPS: Enables secure DNS resolution via HTTPS proxy Network backup: VRRP, wired failover options Hotspot: Captive portal, RADIUS server support, MAC auth, SMS auth, SSO, custom themes, walled garden, user scripts SSHFS: Mount remote file systems via SSH Traffic Management: Real-time monitoring, wireless signal charts, traffic usage history Security Authentication: Local, Radius, TACACS+ Firewall: Zone-based firewall, packet filtering, custom firewall rules, deep packet inspection (DPI) Content filtering: L7 filtering and DNS filtering for blacklists/whitelists, adult content, gambling, and others Access control: MAC filtering, port blocking, IP/MAC binding VPN OpenVPN: Client/server mode, TLS/SSL encryption, compression, certificate/username-password-based authentication IPsec: IKEv1/v2, X.509 certificates, pre-shared keys GRE: GRE tunnel configuration support L2TP: Client/server support, optional encryption PPTP: Client/server support WireGuard: Fast, modern VPN protocol with simple configuration DMVPN: Dynamic Multipoint VPN using NHRP and IPsec MODBUS MODBUS TCP: MODBUS master/client and slave/server support MODBUS RTU: Over RS232, RS485; master/client and slave/server MODBUS Serial to TCP gateway: Transparent MODBUS bridging MODBUS to JSON: Converts MODBUS registers into JSON for easy integration MODBUS polling: Periodic register polling and control from WebUI MODBUS logging: Local or remote logging of MODBUS data DLMS/COSEM DLMS/COSEM client: Communication with energy meters using DLMS/COSEM protocol Communication modes: HDLC and TCP/IP Data extraction: Read data from objects, structured format output (JSON, XML) Scheduling: Periodic reads and data uploads API Remote API: RESTful API for status, configuration, control SMS API: HTTP and email-to-SMS APIs JSON-RPC: Lightweight remote procedure call protocol support MQTT: Publish/subscribe integration, supports JSON payloads SNMP: SNMP v1/v2/v3 for monitoring and management Modbus API: MODBUS data via REST API WebSocket: Real-time data feeds for WebSocket clients Management WebUI: Responsive graphical web interface for all device functions CLI: Full-featured command-line interface via SSH, Telnet, serial TR-069: Remote management protocol support for auto-configuration servers (ACS) SMS management: SMS-based control and configuration FOTA: Firmware-over-the-air updates with scheduling support Backup & Restore: Full configuration backup/restore to/from file or remote Multi-user access: Role-based access with permission levels Audit logs: Tracks changes and access for compliance IoT Platforms Integration support: Microsoft Azure IoT Hub, AWS IoT Core, Google Cloud IoT, Cumulocity, ThingWorx, Ubidots, and others Protocols: MQTT, HTTP(S), CoAP, WebSockets Payload formats: JSON, XML, custom formats with scripting Custom integration: Script-based logic and cloud connector support Mobile Module: 4G LTE up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Mbps 3GPP Release: Release 9 SIM Switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP USSD: Supports sending and reading Unstructured Supplementary Service Data messages Block/Allow List: Operator block/allow list (by country or separate operators) Band Management: Band lock, Used band status display SIM PIN Code Management: SIM PIN code management enables setting, changing, or disabling the SIM card's PIN APN: Auto APN Bridge: Direct connection (bridge) between mobile ISP and device on LAN Passthrough: Router assigns its mobile WAN IP address to another device on LAN Ethernet LAN: 2 x ETH ports (can be configured as WAN), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover PoE IN PoE Ports: 1 x PoE In PoE Standards: 802.3af/at PoE OUT PoE Ports: 1 x PoE Out PoE Standards: 802.3af Alternative B PoE Max Power per Port (at PSE): 15 W Max (power supply unit dependent) Network Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing Network Protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN VoIP Passthrough Support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall: Port forward, traffic rules, custom rules, TTL target customisation Firewall Status Page: View all your Firewall statistics, rules, and rule counters Ports Management: View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on Network Topology: Visual representation of your network, showing which devices are connected to which other devices DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e DDNS: Supported >25 service providers, others can be configured manually DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS Network Backup: VRRP, Wired options, each of which can be used as an automatic Failover Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes SSHFS: Possibility to mount remote file system via SSH protocol Traffic Management: Real-time monitoring, wireless signal charts, traffic usage history Security Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator Firewall: Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64 Attack Prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) VLAN: Port and tag-based VLAN separation Mobile Quota Control: Mobile data limit, customizable period, start time, warning limit, phone number WEB Filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only Access Control: Flexible access control of SSH, Web interface, CLI and Telnet SSL Certificate Generation: Let's Encrypt and SCEP certificate generation methods 802.1x: Port-based network access control server VPN OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods OpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256 IPsec: XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) GRE: GRE tunnel, GRE tunnel over IPsec support PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code DMVPN: Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support SSTP: SSTP client instance support ZeroTier: ZeroTier VPN client support WireGuard: WireGuard VPN client and server support Tinc: Tinc offers encryption, authentication and compression in its tunnels. Client and server support. OPC UA Supported Modes: Client, Server Supported Connection Types: TCP MODBUS Supported Modes: Server, Client Supported Connection Types: TCP Custom Registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality Supported Data Formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII Data to Server Protocol: HTTP(S), MQTT, Azure MQTT Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature MQTT Gateway Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS Server through MQTT broker DNP3 Supported Modes: Station, Outstation Supported Connection: TCP DLMS/COSEM DLMS Support: DLMS - standard protocol for utility meter data exchange Supported Modes: Client Supported Connection Types: TCP COSEM: Allows to scan meter COSEM objects for automatic detection and configuration API Teltonika Networks Web API (beta) Support: Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com Monitoring & Management WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status FOTA: Firmware update from server, automatic notification SSH: SSH (v1, v2) Email: Receive email message status alerts of various services SMS: SMS status, SMS configuration Call: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem MQTT: MQTT Broker, MQTT publisher SNMP: SNMP (v1, v2, v3), SNMP Trap, Brute force protection JSON-RPC: Management API over HTTP/HTTPS RMS: Teltonika Remote Management System (RMS) IoT Platforms ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type Cumulocity - Cloud of Things: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICC