Teltonika RUT271 RedCap 5G Industrial Router

Teltonika RUT271 RedCap 5G Industrial Router The RUT271 is a Redcap 5G router, bridging the gap between 4G and full-capacity 5G. Supporting SA architecture, this 5G router can wirelessly support up to 50 end devices and features the low latency of 5G—at affordable pricing. The RUT271 supports Wi-Fi and is backward compatible with 4G LTE Cat 4. This industrial-grade RedCap 5G router is also equipped with WAN failover, two 10/100 RJ45 ports, a compact and durable design, and numerous other brilliant features for expert professional deployment. Technical Specifications: Mobile Mobile module 5G Sub-6Ghz SA 223 Mbps DL, 123 Mbps UL 4G LTE Cat 4 – LTE 195 Mbps DL, 105 Mbps UL 3GPP Release Release 17 RedCap Status IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Data sent/received, LAC, TAC, cell ID ARFCN, UARFCN, EARFCN, MCC, and MNC SMS SMS status, SMS configuration EMAIL to SMS, SMS to EMAIL SMS to HTTP, SMS to SMS Scheduled SMS, SMS autoreply SMPP USSD Supports sending and reading Unstructured Supplementary Service Data messages Block/Allow list Operator block/allow list (by country or separate operators) Multiple PDN Possibility to use different PDNs for multiple network access and services Band management Band lock Used band status display SIM PIN code management SIM PIN code management enables setting, changing, or disabling the SIM card's PIN APN Auto APN Bridge Direct connection (bridge) between mobile ISP and device on LAN Passthrough Router assigns its mobile WAN IP address to another device on LAN Wireless Wireless mode 802.11b/g/n (Wi-Fi 4) Access Point (AP) Station (STA) Wi-Fi security WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE AES-CCMP, TKIP, Auto-cipher modes, client separation EAP-TLS with PKCS#12 certificates, disable auto-reconnect 802.11w Protected Management Frames (PMF) SSID/ESSID SSID stealth mode and access control based on MAC address Wi-Fi users Up to 50 simultaneous connections Wireless Connectivity Features Wireless mesh (802.11s) Fast roaming (802.11r) BSS transition management (802.11v) Radio resource measurement (802.11k) Ethernet Ethernet Ports 2 x Ethernet ports (10/100 Mbps) Supports DHCP Client/Static IP, supports VLAN tagging (802.1Q) Network Routing Static routing, dynamic routing (RIP, OSPF) Routing based on destination/source address, interface, and firewall mark NAT Source NAT, Destination NAT, one-to-one NAT, NAT rules based on source/destination address, port, protocol, and interface Firewall Stateful packet inspection, customizable firewall rules based on IP, port, and protocol DHCP DHCP server/client/relay, static DHCP bindings DNS DNS server, DNS forwarding, DNS over HTTPS, dynamic DNS support Security IP filtering Based on source/destination IP, port, and protocol MAC filtering Based on source MAC address URL filtering Domain and keyword-based filtering VPN Supported protocols OpenVPN, IPsec, L2TP, GRE, PPTP, WireGuard Authentication methods Username/password, pre-shared key, digital certificate Tunneling options Site-to-site, client-to-site, multiple tunnel support VPN passthrough Supported QoS Traffic shaping Bandwidth limit per interface, per IP, or per application Prioritization Application and port-based traffic prioritization Queue types FIFO, SFQ, RED, HFSC Tools Diagnostics Ping, traceroute, DNS lookup, packet capture Monitoring Real-time bandwidth usage, system logs, event alerts Remote management Web UI, SSH, SNMP, TR-069 Environmental Operating temperature -40°C to 85°C Humidity 10% to 90% non-condensing Ingress Protection Rating IP30 Regulatory & Type Approvals Regulatory CE, UKCA, FCC, IC (ISED), RCM, CB, WEEE EMC Emissions & Immunity Standards CE/UKCA: EN 55032:2015 + A11:2020 + A1:2020 EN 55035:2017 + A11:2020 EN IEC 61000-3-2:2019 + A1:2021 + A2:2024 EN 61000-3-3:2013 + A1:2019 + A2:2021 EN 301 489-1 V2.2.3 EN 301 489-17 V3.3.1 EN 301 489-19 V2.2.1 EN 301 489-52 V1.2.1 FCC/ISED(IC): 47 CFR Part 15 Subpart B ICES-003: Issue 7 (October 2020) RCM: AS/NZS CISPR 32:2015 + A1 ESD EN 61000-4-2: 2009 Radiated Immunity EN IEC 61000-4-3:2020 EFT EN 61000-4-4: 2012 Surge Immunity (AC Mains Power Port) EN 61000-4-5: 2014 + A1:2017 CS EN 61000-4-6:2014 DIP EN 61000-4-11:2020 RF Standards CE/UKCA: Draft EN 301 908-25 V15.1.1_0.0.21 EN 300 328 V2.2.2 EN 301 908-1 V15.2.1 EN 301 908-13 V13.2.1 RCM: AS/NZS 4268:2017+A1:2021 AS/CA S042.1:2022 AS/CA S042.4:2022 AS/CA S042.5:2022+A1:2022 Standards (Wi-Fi 2.4 GHz, 5 GHz) FCC: 47 CFR Part 15 Subpart C - § 15.247, Subpart E - § 15.407 IC (ISED): RSS-247 Issue 3 (August 2023) RSS-Gen Issue 5 (April 2018) Amendment 2 (February 2021) RF Exposure Standards FCC: 47 CFR - § 2.1091 47 CFR - §1.1310 KDB 447498 D04 Interim General RF Exposure Guidance v01 IC (ISED): RSS-102 Issue 6 (December 2023) Safety Standards CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020 CB: IEC 62368-1:2018 RCM: AS/NZS 62368.1:2022